Hi,
I want to build a VPN between my work and my home.
I use at Work, an OpenBSD 4.9 gateway (so we use PF).
I installed openvpn 2.1.4
The network :
INTERNET--<ADSL_ROUTER>--sis0<OpenBSD_PF>sis1--(LAN--server,ISP_router)
server (rdp) have as gateway 10.100.1.254
OpenBSD gateway (sis1) : 10.100.1.250
Our lan machine have as gateway 10.100.1.250
I can't change gateway on server, because it is needed for others locations (use ISP router)
What i want :
connect on server (rdp) using a VPN (preshared key)
But i don't know if it will work?? because, the gateway of the server is 10.100.1.254 instead of 10.100.1.250
I tried this :
<server.conf>proto tcp-server
port 1194
dev tun0
dev-type tap
secret /etc/openvpn/server.key
push "route 10.100.1.0 255.255.255.0 10.100.1.250"
persist-key
persist-tun
ping-timer-rem
keepalive 10 60
user _openvpn
group _openvpn
pf.conf:
...
set skip on lo
match out on egress inet from $lan:network to any nat-to egress
block log all
pass out on egress inet proto tcp
pass out on egress inet proto udp
pass in on $lan inet proto tcp from $lan:network to any
pass in on $lan inet proto udp from $lan:network to any
pass inet proto icmp all icmp-type 8 code 0
pass out on $lan inet proto tcp from any to any port {3389,22}
pass in on egress inet proto tcp from any to any port {22,1194}
pass in quick on {bridge0,tun0}
pass out quick on {tun0,bridge0}
...
on my win7 (home):
proto tcp-client
dev tap
remote ip_address 1194
secret ./server.key
persist-key
persist-tun
ping-timer-rem
keepalive 10 60
I can connect, but i can't ping 10.100.1.250, 10.100.1.254, server
also RDP doesn't work, there's no traffic
If someone can help me on.
Thank you very much !
PS:
I also tried using isakmpd.
It works, i can ping 10.100.1.250, but no server and no 10.100.1.254, because server have as gateway 10.100.1.254 instead of 10.100.1.250
And i can't change the gateway on the server*
