Hey guys,
We've had several users complaining about not being able to connect (they were all on W7). Here's the log for one of those attempts.
Aug 16 06:52:51 us-ca-li pppd[27924]: Connect: ppp27 <--> /dev/pts/28
Aug 16 06:52:57 us-ca-li pppd[27924]: Unsupported protocol 'IPv6 Control Protocol' (0x8057) received
Aug 16 06:52:58 us-ca-li pptpd[27923]: CTRL: Ignored a SET LINK INFO packet with real ACCMs!
Aug 16 06:53:00 us-ca-li pppd[27924]: local IP address 10.42.124.1
Aug 16 06:53:00 us-ca-li pppd[27924]: remote IP address 10.42.124.34
Aug 16 06:53:01 us-ca-li pppd[27924]: MPPE 128-bit stateless compression enabled
Aug 16 06:53:03 us-ca-li pppd[27924]: MPPE disabled
Aug 16 06:53:03 us-ca-li pppd[27924]: Connect time 0.1 minutes.
Aug 16 06:53:03 us-ca-li pppd[27924]: Sent 390 bytes, received 540 bytes.
Aug 16 06:53:09 us-ca-li pppd[27924]: Connection terminated.
Aug 16 06:53:09 us-ca-li pppd[27924]: write: Bad file descriptor (9)
Aug 16 06:53:09 us-ca-li pppd[27924]: Modem hangup
Aug 16 06:53:09 us-ca-li pppd[27924]: Exit.
Do any of you know what the "CTRL: Ignored a SET LINK INFO packet with real ACCMs!" could be about? Or if that even causes the connection problem?
I'm thankful for any help or feedback.
Cheers
