Hello and thanks for your help Sorry for my bad English. I have tried to find a solution on the forum but without result I have installed openvpn server on Windows xp sp3 with the parameter auth-user-pass-verify. All is ok when I use the option via-env. My client can connect on the server. But when I use option via-file , I have this message in log file 10.165.15.25:49164 Note: cannot open d:/tmpvpn\openvpn_up_796b5fbbe827a3c3ffbab4fe41ef8518.tmp for WRITE 10.165.15.25:49164 TLS Auth Error: could not write username/password to file: d:/tmpvpn\openvpn_up_796b5fbbe827a3c3ffbab4fe41ef8518.tmp 10.165.15.25:49164 TLS Auth Error: Auth Username/Password verification failed for peer Sat Jul 23 15:30:25 2011 us=725000 10.165.15.25:49164 SIGTERM[soft,auth-control-exit] received, client-instance exiting I have changed the right with windows option and the command attrib in dos with attribu -r ; but without result I don’t understand , could you help me please ? Regards My conf ################################################# local 192.168.1.100 port 1200 proto tcp-server dev tap dev-node monvpn ca ca.crt cert server.crt key server.key script-security 3 tmp-dir d:/tmpvpn auth-user-pass-verify test.bat via-file dh dh1024.pem server-bridge 192.168.0.1 255.255.255.0 192.168.0.2 192.168.0.5 push "route 192.168.1.0 255.255.255.0" keepalive 10 120 comp-lzo persist-key persist-tun verb 4 mute 20

hi there, i noticed the following to your config: local 192.168.1.100 server-bridge 192.168.0.1 255.255.255.0 192.168.0.2 192.168.0.5 push "route 192.168.1.0 255.255.255.0" which exactly scenario are you trying to accomplish here? routing or bridging? the above will not work... also >tmp-dir d:/tmpvpn is this folder exists? which files are in it? do you have WRITE permission in this folder? Michael.

hello and thank you for your answer. local 192.168.1.100 is the listening adresse on my server, because there are two networks cards. server-brige 192.168.0.1 255.255.255.0 192.168.0.2 192.168.0.5 : 192.168.0.1 is ip adress taken by the vpn server and 192.168.0.2 192.168.0.5 is the adress pool free for the client. push route 192.168.1.0 255.255.255.0 is route for allow a client reach an other subnet. I specify that I make a bridging scenario and this configuration works when i don't use auth-user-pass-verify env-file option. yes the d:\tmpvpn exit and when my client enter login and password, a file as openvpn_up_796b5fbbe827a3c3ffbab4fe41ef8518.tmp is create in this directory with error message in the log. see the first post . And yes i have the write permission on this directory (I have even tested with all people full control). I have tried with an other directory and default directory %USERPROFILE%\Local Settings\Temp but i have the same error message. thank Regards

Windows use in paths backslash '\'. So correct it in your config. As can you see, OpenVPN itself prepends a backlash before file name. Also, which account is OpenVPN running? As a service? Does that acount have full control to the folder? [quote]%USERPROFILE%\Local Settings\Temp[/quote] For directories with spaces you must use double quotes to delimit the directory path.

I have changed temp file with option tmp-dir, when i use d:/tmpvpn and i see the tmp file, but at the beginning i haven't used this option and temp directory was %USERPROFILE%\Local Settings\Temp by default. I have installed openvpn with an administrator account but not as a service. it's the same which lauches the application. The account can create a file without problem in the directory. On the other hand i noticed that the tmp file openvpn_up_796b5fbbe827a3c3ffba.....tmp is always in read only in the windows properties,I don't know why I tried to give all people full control on the directory to test d:/tmpvpn but without result

So, I've added [code]tmp-dir d:/tmpvpn auth-user-pass-verify test.bat via-file[/code] in my server's config. The created test.bat in the folder where *.ovpn resides with the following: [code]echo "%~1" >> d:\aa.txt type "%~1" >> d:\aa.txt echo -------------------- >> d:\aa.txt exit 0[/code] Then I start server and client. On client I input some user and password (user: a, pass: v). Clients connects well. The output to aa.txt is: [quote]"d:/tmpvpn\openvpn_up_f968aaeaa4f48312d00cbd0f32d90b4e.tmp" a v -------------------- [/quote] The loggin on the server is: [quote]D:\openvpn_server\config>echo "d:/tmpvpn\openvpn_up_f968aaeaa4f48312d00cbd0f32d90b4e.tmp" 1>>d:\aa.txt D:\openvpn_server\config>type "d:/tmpvpn\openvpn_up_f968aaeaa4f48312d00cbd0f32d90b4e.tmp" 1>>d:\aa.txt D:\openvpn_server\config>echo -------------------- 1>>d:\aa.txt D:\openvpn_server\config>exit 0 Mon Jul 25 20:26:35 2011 192.168.0.1:2109 TLS: Username/Password authentication succeeded for username 'a' [/quote] So its definettly folder security access problem. read-only flag is obsolete for OpenVPN, does not interfere. What version of OpenVPN you are running?

Hello I have tried like you, with the same script and i have the log : [code][/code] [color=#4040FF]10.165.15.25:49175 Note: cannot open d:/tmpvpn\openvpn_up_03854301076623c9e160689327e166fe.tmp for WRITE 10.165.15.25:49175 TLS Auth Error: could not write username/password to file: p/tmpvpn\openvpn_up_03854301076623c9e160689327e166fe.tmp us=511000 10.165.15.25:49175 TLS Auth Error: Auth Username/Password verification failed for peer us=511000 10.165.15.25:49175 SIGTERM[soft,auth-control-exit] received, client-instance exiting us=511000 TCP/UDP: Closing socket us=578000 MULTI: multi_create_instance called[/color] my version is OpenVPN 2.2.1 -- released on 2011.07.06 on the [b]tmpvpn [/b]directory the right are [b]all peole full control[/b] I must have a right problem but I don't know where .

Try to reinstall OpenVPN. Then delete tmpvpn folder. Create it again. Go to sequrity tab of the folder, add Everyone and tick full control box, click Apply, then click Advanced, check Replace permissions on all child box (just to be sure), and press ok, and ok. And try again.

this looks like a bug in openvpn 2.2.0+ ; try downgrading to 2.1.4. The problem is with the ':' character. If you can confirm that 2.1.4 works then I'll open a bug for 2.2.0+.

Hmmm ... I notice this in the log: [code]d:/tmpvpn\openvpn_up_03854301076623c9e160689327e166fe.tmp[/code] It's a mixture of backslash and (forward) slash ... this might cause confusion as well. Try using only backslash in the path argument to --tmpdir.

The problem still seems to exist using the latest binary from openvpn.net (OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11]) [code]Mon May 07 12:40:01 2012 192.168.151.78:62058 Re-using SSL/TLS context Mon May 07 12:40:01 2012 192.168.151.78:62058 LZO compression initialized Mon May 07 12:40:01 2012 192.168.151.78:62058 WARNING: normally if you use --mss fix and/or --fragment, you should also set --tun-mtu 1500 (currently it is 1492) Mon May 07 12:40:01 2012 192.168.151.78:62058 Control Channel MTU parms [ L:1566 D:138 EF:38 EB:0 ET:0 EL:0 ] Mon May 07 12:40:01 2012 192.168.151.78:62058 Data Channel MTU parms [ L:1566 D: 1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Mon May 07 12:40:01 2012 192.168.151.78:62058 Local Options hash (VER=V4): '07ee 0ac2' Mon May 07 12:40:01 2012 192.168.151.78:62058 Expected Remote Options hash (VER= V4): 'c69db0ac' Mon May 07 12:40:01 2012 192.168.151.78:62058 VERIFY OK: depth=1, /C=US/ST=CA/L= SanFrancisco/O=OpenVPN/OU=openvpnserver/CN=openvpnserver/name=openvpnserver/emai lAddress=mail@host.domain Mon May 07 12:40:01 2012 192.168.151.78:62058 VERIFY OK: depth=0, /C=US/ST=CA/L= SanFrancisco/O=OpenVPN/OU=openvpnserver/CN=openvpnserver/name=vpnclient01/emailA ddress=mail@host.domain Mon May 07 12:40:01 2012 192.168.151.78:62058 Note: cannot open c:\tmp\openvpn_u p_34240a548fb0d296f480be5254bd9428.tmp for WRITE Mon May 07 12:40:01 2012 192.168.151.78:62058 TLS Auth Error: could not write us ername/password to file: c:\tmp\openvpn_up_34240a548fb0d296f480be5254bd9428.tmp Mon May 07 12:40:01 2012 192.168.151.78:62058 TLS Auth Error: Auth Username/Pass word verification failed for peer[/code] He creates the file in the directory, but seems not to be able to write in it. Any advice here?

problem with auth-user-pass-verify option

seq

Hello this, it is my version, I installed this release today.

TinCanTech

A new version was released today, which fixes the problem you have with readonly files.

bezjosh99

i have same problem how can i solve this

TinCanTech

bezjosh99 wrote i have same problem how can i solve this

You have a different problem.

bezjosh99

how can i solve this
get-vidmateapp.com
get-mobdroapk.com

« Previous Page