shaheryar Hi I have made the setup of openvpn up and running but i am enable to connect with my DHCP network here is the architecture of my network i have a dsl modem connected with wifi router of tplink both are in dhcp and connected to my desktop which has windows 7 i have another Laptop in which ubuntu 11.04 natty is installed with an static ip 192.168.2.10 which act as a vpn server DSL Modem Info IP : 192.168.1.2 (it is in DHCP configuration) Mask : 255.255.255.0 default gateway: 192.168.1.1 (internet connection on this IP) TPlink Wifi router IP : 192.168.2.2 (it is in DHCP configuration) Mask : 255.255.255.0 default gateway: 192.168.2.2 Routing Table information ID Destination Network Subnet Mask Gateway Interface 1 192.168.2.0 255.255.255.0 0.0.0.0 LAN & WLAN 2 192.168.1.0 255.255.255.0 0.0.0.0 WAN 3 239.0.0.0 255.0.0.0 0.0.0.0 LAN & WLAN 4 0.0.0.0 0.0.0.0 192.168.1.1 WAN Ifconfig output eth0 Link encap:Ethernet HWaddr 00:1e:ec:81:b3:f3 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:738 errors:0 dropped:0 overruns:0 frame:0 TX packets:234 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82439 (82.4 KB) TX bytes:30697 (30.6 KB) Interrupt:16 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2786 errors:0 dropped:0 overruns:0 frame:0 TX packets:2786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:216970 (216.9 KB) TX bytes:216970 (216.9 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.255.1 P-t-P:192.168.255.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:22:68:98:e0:02 inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::222:68ff:fe98:e002/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15392 errors:0 dropped:0 overruns:0 frame:0 TX packets:6723 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4023215 (4.0 MB) TX bytes:1068844 (1.0 MB) openvpn Server configuration file: dev tun port 6999 proto udp ca keys/ca.crt cert keys/server.crt key keys/server.key #secret file dh keys/dh1024.pem server 192.168.255.0 255.255.255.0 push “route 192.168.2.0 255.255.255.0” keepalive 10 120 comp-lzo user nobody group nogroup persist-key persist-tun verb 3 mute 20 Client Configuration file for windows openvpn dev tun port 6999 proto udp remote 192.168.2.10 ifconfig 192.168.255.2 192.168.255.1 ca ca.crt cert client1.crt key client1.key tls-client keepalive 10 20 comp-lzo user nobody group nogroup persist-key persist-tun verb 3 please help me out
Mimiko server 192.168.255.0 255.255.255.0 ------- ifconfig 192.168.255.2 192.168.255.1 You can't use 255 as IP. It is a broadcast IP, meaning the packed is for everyone. Change it to, for example, 254.
janjust wrong, Mimiko: 192.168.255.1 is a perfectly valid address ; remove the line ifconfig 192.168.255.2 192.168.255.1 from your client config file and try again
