Hi guys. My servertap is refusing to assume any ip configuration. I've create a working test environment. so i assume i the hang of th"e configuration. (keys from test environment are generated on production server) The tap is visible in the "Network connections" ip protocol is enabled. But "ipconfig" does not show the adapter tap al, nothing nada. Relevant info: xp sp3 fully updated mc affee (I did trie with the firewall turned off) Removed/reinstalled openvpn (Stable 2.1.4) Tried to manualy assign an ip It apears the tap installation is ging wrong, but what .. here is the part where its going wrong in the vpnserverlogs. [code] Tue Jan 11 22:16:29 2011 us=265000 GDGR: best=0 lm=10 Tue Jan 11 22:16:29 2011 us=265000 ROUTE default_gateway=192.168.0.1 Tue Jan 11 22:16:29 2011 us=265000 TAP-WIN32 device [tap2] opened: \\.\Global\{2 5E15326-B209-42A8-8A03-1E1A1A827411}.tap Tue Jan 11 22:16:29 2011 us=281000 NOTE: could not get adapter index for {25E153 26-B209-42A8-8A03-1E1A1A827411} Tue Jan 11 22:16:29 2011 us=281000 TAP-Win32 Driver Version 9.7 Tue Jan 11 22:16:29 2011 us=281000 TAP-Win32 MTU=1500 Tue Jan 11 22:16:29 2011 us=281000 Notified TAP-Win32 driver to set a DHCP IP/ne tmask of 10.8.0.1/255.255.255.252 on interface {25E15326-B209-42A8-8A03-1E1A1A82 7411} [DHCP-serv: 10.8.0.2, lease-time: 31536000] Tue Jan 11 22:16:29 2011 us=281000 Sleeping for 10 seconds... Tue Jan 11 22:16:39 2011 us=281000 GDGR: route[0] 0.0.0.0/0.0.0.0 i=3 m=10 Tue Jan 11 22:16:39 2011 us=281000 GDGR: route[1] 127.0.0.0/255.0.0.0 i=1 m=1 Tue Jan 11 22:16:39 2011 us=281000 GDGR: route[2] 192.168.0.0/255.255.255.0 i=3 m=10 Tue Jan 11 22:16:39 2011 us=281000 GDGR: route[3] 192.168.0.60/255.255.255.255 i =1 m=10 Tue Jan 11 22:16:39 2011 us=281000 GDGR: route[4] 192.168.0.255/255.255.255.255 i=3 m=10 Tue Jan 11 22:16:39 2011 us=281000 GDGR: route[5] 224.0.0.0/240.0.0.0 i=3 m=10 Tue Jan 11 22:16:39 2011 us=281000 GDGR: route[6] 255.255.255.255/255.255.255.25 5 i=2 m=1 Tue Jan 11 22:16:39 2011 us=281000 GDGR: route[7] 255.255.255.255/255.255.255.25 5 i=3 m=1 Tue Jan 11 22:16:39 2011 us=281000 GDGR: best=0 lm=10 Tue Jan 11 22:16:39 2011 us=281000 DEBUG: IP Locate: ip=192.168.0.1 nm=255.255.2 55.0 index=3 count=-1 Tue Jan 11 22:16:39 2011 us=281000 C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MA SK 255.255.255.0 10.8.0.2 Tue Jan 11 22:16:39 2011 us=296000 DEBUG: IP Locate: ip=10.8.0.2 nm=0.0.0.0 inde x=-1 count=0 Tue Jan 11 22:16:39 2011 us=296000 Warning: route gateway is not reachable on an y active network adapters: 10.8.0.2 Tue Jan 11 22:16:39 2011 us=296000 DEBUG: route find if: on_tun=0 count=0 index= -1 Tue Jan 11 22:16:39 2011 us=296000 Route addition via IPAPI failed [adaptive] Tue Jan 11 22:16:39 2011 us=296000 Route addition fallback to route.exe Tue Jan 11 22:16:39 2011 us=296000 Attempting to lock Win32 semaphore 'openvpn_n etcmd' prior to net shell command (timeout = 600 sec) Tue Jan 11 22:16:39 2011 us=296000 Locked Win32 semaphore 'openvpn_netcmd' The route addition failed: Either the interface index is wrong or the gateway do es not lie on the same network as the interface. Check the IP Address Table for the machine. [/code]

Hello, Yeah. Something is wonky with your installation. Try this from a command line and post your output: cd \program files\openvpn\bin tapinstall.exe findall tap0901 Regards, Stephen

Hey Gladiator, Here it is, Regards, Mudfight [code] C:\Documents and Settings\Administrator>cd "c:\Program Files\OpenVPN\bin" C:\Program Files\OpenVPN\bin>tapinstall.exe findall tap0901 ROOT\NET\0000 : TAP-Win32 Adapter V9 1 matching device(s) found. [/code] been messing with the command, could it have been messing with microsofts vpc ? [code] tapinstall.exe find * ... ROOT\CNTX_VPCNETS2_MP\0000 : Intel(R) 82566DM-2 Gigabit Network Connection -Virtual Machine Network Services Driver ROOT\CNTX_VPCNETS2_MP\0001 : Sitecom 300N Wireless Dualband USB adapter WL-329 - Virtual Machine Network Services Driver ROOT\CNTX_VPCNETS2_MP\0002 : Wireless Network 300N USB dongle WL-302 - Virtual MachineNetwork Services Driver ROOT\CNTX_VPCNETS2_MP\0003 : Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) - Virtual Machine Network Services Driver [b]ROOT\CNTX_VPCNETS2_MP\0004 : TAP-Win32 Adapter V9 - Virtual Machine Network Services Driver[/b] ...[/code]

wow what verb were you using in that logfile!? verb 5 is the max you should need for troubleshooting try adding this to your config [code]route-method exe[/code] if that does not work, try this instead [code]ip-win32 netsh[/code]

[quote="krzee"]wow what verb were you using in that logfile!? verb 5 is the max you should need for troubleshooting try adding this to your config [code]route-method exe[/code] if that does not work, try this instead [code]ip-win32 netsh[/code][/quote] Ehm 9 :D back to 5 now :lol: Ok, so for the sake of it all uninstalled/reininstalled openvpn again. didnt work results so far. route-method exe [code] Wed Jan 12 11:44:17 2011 us=609000 NOTE: could not get adapter index for {4C4CE6FC-4F42-4793-BD61-7336190C59A6} Wed Jan 12 11:44:17 2011 us=609000 TAP-Win32 Driver Version 9.7 Wed Jan 12 11:44:17 2011 us=609000 TAP-Win32 MTU=1500 Wed Jan 12 11:44:17 2011 us=609000 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.0.1/255.255.255.252 on int erface {4C4CE6FC-4F42-4793-BD61-7336190C59A6} [DHCP-serv: 10.8.0.2, lease-time: 31536000] Wed Jan 12 11:44:17 2011 us=609000 Sleeping for 10 seconds... Wed Jan 12 11:44:27 2011 us=609000 C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.2 [b]The route addition failed: Either the interface index is wrong or the gateway does not lie on the same network as the in terface. Check the IP Address Table for the machine.[/b] Wed Jan 12 11:44:27 2011 us=656000 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Jan 12 11:44:27 2011 us=656000 UDPv4 link local (bound): [undef]:22334 Wed Jan 12 11:44:27 2011 us=656000 UDPv4 link remote: [undef] Wed Jan 12 11:44:27 2011 us=656000 MULTI: multi_init called, r=256 v=256 Wed Jan 12 11:44:27 2011 us=656000 IFCONFIG POOL: base=10.8.0.4 size=62 Wed Jan 12 11:44:27 2011 us=656000 IFCONFIG POOL LIST Wed Jan 12 11:44:27 2011 us=656000 server02,10.8.0.4 Wed Jan 12 11:44:27 2011 us=656000 Initialization Sequence Completed [/code] So the tunnel open fine (as it dis before) but no ip configuration possible on it see below [code] C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : server01 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter 100Mb: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) Physical Address. . . . . . . . . : 00-18-F8-0B-39-B9 Ethernet adapter Gbit: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) 82566DM-2 Gigabit Network Connection Physical Address. . . . . . . . . : 00-1C-C4-99-B4-37 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.60 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 [/code] No tap again As for the next command, it started out hopefull [quote]Wed Jan 12 11:51:05 2011 us=93000 ROUTE default_gateway=192.168.0.1 Wed Jan 12 11:51:06 2011 us=109000 NETSH: C:\WINDOWS\system32\netsh.exe interface ip set address tap2 static 10.8.0.1 25 5.255.255.252 Ok. Wed Jan 12 11:51:13 2011 us=359000 NETSH: C:\WINDOWS\system32\netsh.exe interface ip delete dns tap2 all Ok. Wed Jan 12 11:51:19 2011 us=921000 NETSH: C:\WINDOWS\system32\netsh.exe interface ip delete wins tap2 all Ok. Wed Jan 12 11:51:25 2011 us=62000 TAP-WIN32 device [tap2] opened: \\.\Global\{4C4CE6FC-4F42-4793-BD61-7336190C59A6}.tap Wed Jan 12 11:51:25 2011 us=62000 NOTE: could not get adapter index for {4C4CE6FC-4F42-4793-BD61-7336190C59A6} Wed Jan 12 11:51:25 2011 us=62000 TAP-Win32 Driver Version 9.7 Wed Jan 12 11:51:25 2011 us=62000 TAP-Win32 MTU=1500 Wed Jan 12 11:51:25 2011 us=62000 Sleeping for 10 seconds... Wed Jan 12 11:51:35 2011 us=62000 C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.2 Wed Jan 12 11:51:35 2011 us=62000 Warning: route gateway is not reachable on any active network adapters: 10.8.0.2 Wed Jan 12 11:51:35 2011 us=62000 Route addition via IPAPI failed [adaptive] Wed Jan 12 11:51:35 2011 us=62000 Route addition fallback to route.exe The route addition failed: Either the interface index is wrong or the gateway does not lie on the same network as the in terface. Check the IP Address Table for the machine.[/quote] Netsh isn't barfing on it but nada in the ipconfig or in the route print [code]C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : server01 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter 100Mb: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) Physical Address. . . . . . . . . : 00-18-F8-0B-39-B9 Ethernet adapter Gbit: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) 82566DM-2 Gigabit Network Connection Physical Address. . . . . . . . . : 00-1C-C4-99-B4-37 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.60 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 C:\Documents and Settings\Administrator>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 18 f8 0b 39 b9 ...... Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) - McAfee Core NDIS Intermediate Filt er Miniport 0x3 ...00 1c c4 99 b4 37 ...... Intel(R) 82566DM-2 Gigabit Network Connection - McAfee Core NDIS Intermediate Filter Min iport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.60 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.0.0 255.255.255.0 192.168.0.60 192.168.0.60 10 192.168.0.60 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.0.255 255.255.255.255 192.168.0.60 192.168.0.60 10 224.0.0.0 240.0.0.0 192.168.0.60 192.168.0.60 10 255.255.255.255 255.255.255.255 192.168.0.60 2 1 255.255.255.255 255.255.255.255 192.168.0.60 192.168.0.60 1 Default Gateway: 192.168.0.1 =========================================================================== Persistent Routes: None [/code]

Ok i've also tried the beta. same result no ipconfig.

post your client and server config without comments im betting you have an ifconfig that doesnt belong

[quote="krzee"]post your client and server config without comments im betting you have an ifconfig that doesnt belong[/quote] I'm going to take that bet :) I want to emphasize the fact there the network adapter does not show up in ipconfig after tapinstallation en before starting the server config. While i'm pretty sure it should show up before starting the config. Anyway i could be wrong so, below my configs [code]->ServerClientipconfig serveripconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : server01 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter 100Mb: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) Physical Address. . . . . . . . . : 00-18-F8-0B-39-B9 Ethernet adapter Gbit: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) 82566DM-2 Gigabit Network Connection Physical Address. . . . . . . . . : 00-1C-C4-99-B4-37 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.60 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 ->ipconfig clientipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : server02 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connect ion Physical Address. . . . . . . . . : 00-08-74-F5-56-6A Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.236 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 Lease Obtained. . . . . . . . . . : Friday, January 14, 2011 12:54:57 AM Lease Expires . . . . . . . . . . : Friday, January 21, 2011 12:54:57 AM Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Linksys LNE100TX Fast Ethernet Adapt er(LNE100TX v4) Physical Address. . . . . . . . . : 00-18-F8-0B-39-C5 Ethernet adapter tap: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : TAP-Win32 Adapter V9 Physical Address. . . . . . . . . : 00-FF-DF-B9-4A-52 [/code]

At command prompt, type set devmgr_show_nonpresent_devices=1, and then press ENTER. Type Start DEVMGMT.MSC, and then press ENTER. Click View, and then click Show Hidden Devices. Expand the Network Adapters tree tell me what you see or post a screenshot if you prefer

Allrighty 1 normal view, and one with all the hidden ones [img]http://fishwww.nl.eu.org/normal.png[/img] [img]http://fishwww.nl.eu.org/hidden.png[/img]

two of our clients doesn't connect and present the same behavior of mudfight. Our thread is: https://forums.openvpn.net/topic7537.html Sorry I haven't posted here, but the search in the forum with "could not get adapter index" results always "No suitable matches were found". (I found this thread with a google.com search on the same string) One of them, I'm sure, has McAfee Antivirus+Firewall installed, so we can suspect something related to and old McAfee that hook the interface and damage the WinSock from a past post: http://openvpn.net/archive/openvpn-users/2005-11/msg00012.html ? Do you want to test WinSockFix ?

Tap installs, but doesn't show up in ipconfig.

efa

one of our two clients now can connect thanks to WinSock XP fix 1.2

« Previous Page