How to connect client to server to client

alanin

Hello.
OpenVpn Server and OpenVpnclient installed on same machine Centos 7.
How can I give client 10.8.0.2 access to client 192.168.248.10 through server 10.8.0.1?

Remote client 10.8.0.2
Server 10.8.0.1
Client that is installed on server 192.168.248.10

server has access to client's resources 192.168.248.10.
server client has access to the server 10.8.0.1.
__
Setting
__
Server.conf

port 1194
proto udp
dev-tun0
dh /etc/openvpn/keys/dh.pem
crl-verify /etc/openvpn/crl.pem
subnet topology
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
client-config-dir /etc/openvpn/ccd
push "dhcp-option DNS 1.1.1.1"
user nobody
group nobody
tls-crypt /etc/openvpn/keys/ta.key
auth sha256
cipher AES-256-GCM
persist key
persist-tun
status /var/log/openvpn/openvpn-status.log
log /var/log/openvpn/openvpn.log
verb 3
mute 20

___
ccd

push "route 10.8.0.0 255.255.255.0 vpn_gateway"
push "route 192.168.0.0 255.255.255.0 vpn_gateway"
push "route 192.168.248.0 255.255.252.0 vpn_gateway"
push "dhcp-option DNS 77.88.8.8" # First DNS Yandex
push "route 77.88.8.8" # Route to Yandex DNS

__
For server - Client.conf

nobind
client
remote srv0.vpn.zaboronahelp.pp.ua 1196
proto udp
setenv opt block-outside-dns
cipher none
dev tune
route-nopull
log /var/log/openvpn/openvpn-client.log
verb 3
dhcp-option DNS 1.1.1.1 # First DNS Yandex
dhcp-option DNS 77.88.8.8 # First DNS Yandex
route 77.88.8.8 # Route to Yandex DNS

TinCanTech

Linking: https://forums.openvpn.net/viewtopic.php?p=106182#p106182

alanin wrote OpenVpn Server and OpenVpnclient installed on same machine

Why ?

alanin

TinCanTech wrote Linking: https://forums.openvpn.net/viewtopic.php?p=106182#p106182

alanin wrote OpenVpn Server and OpenVpnclient installed on same machine
Why ?

need access to resources on server's network 192.168.0.0, as well as access to resources on client 77.88.8.8.

alanin

there is a solution?

TinCanTech

https://community.openvpn.net/openvpn/wiki/HOWTO#ExpandingthescopeoftheVPNtoincludeadditionalmachinesoneithertheclientorserversubnet

alanin

TinCanTech wrote https://community.openvpn.net/openvpn/wiki/HOWTO#ExpandingthescopeoftheVPNtoincludeadditionalmachinesoneithertheclientorserversubnet

Hello.
This does not fit, the instruction describes how to make a route to the client's network that connects to the server.
My problem is that the client 192.168.248.10 does not connect to the server 10.8.0.1, it connects to another server.
I need client 10.8.0.2 to be able to connect to server 10.8.0.1 and have access to routes 192.168.248.10.

TinCanTech

Then you need a network administrator.