elmercito25
Well, can someone help me that I am failing to access my remote LAN network I am using OPENVPN with a TPLINK 4G LTE router TL-MR6400 as an OPENVPN server the communication between the server and the client is successful they are communicated but I cannot PING the computers on my remote LAN.
The configuration of my remote lan network are computers with a static IP address and they are in the range of 192.168.4.xx mask 255.255.255.0 and in the configuration of the OPENVPN server router the vpn subnet I configure it in 10.8.0.0 mask 255.255. 255.0 does not allow me to configure the vpn subnet in range 4 of my remote lan. Any configuration that I would be missing to ping my remote computers? The firewall is disabled.
Thank you
TinCanTech
This is about configuring your server. It is not related to Openvpn-Connect for Windows in any way what-so-ever.
elmercito25
thanks for answering how do I configure the server to relate to Openvpn-Connect for Windows? is that I am new in this of openvpn.
Thanks
TinCanTech
You start by reading the documentation .. your router manual, for a start.
Then the OpenVPN Howto..
elmercito25
I already read the entire router manual there, it indicates how it should be configured and accessed remotely, I did the same steps, I managed to ping the openvpn server router that has the static IP 192.168.4.1, but the problem is that I cannot ping the others remote computers that are on the same lan network.
I imagine that some configuration must be missing in openvpn that is why I go to this forum so that they can guide me on something that is failing.
Greetings
Mike62374
Hi elmercito. Microsoft has support services available. You could always try reaching out to them.
TinCanTech
What you suspect is irrelevant.
