Change Split VPN Network to non-split

pchernoff

I created my first Network in OpenVPN Cloud. I used the default Split Tunnel On. Since the VPN is on the Internet it makes sense to set Split Tunnel Off. I don't see a way to make that change. Do I need to create a new network with Split Tunnel Off?

The normal reason for turning it off is to minimize the VPN traffic going into the office LAN. But since only office traffic would go to the office anyway I prefer providing the greater protection. Unless I misunderstand.

openvpn_inc

Hi There,

"Split tunnel OFF" means that you will be redirecting all traffic via OpenVPN Cloud.
But it seems you have not configured any vpn egress on a network connector, it means your OpenVPN Cloud does not have access to internet.
That is why "Split Tunnel OFF" is not available.

So you need to allow "vpn egress" via this network's connector to turn off split tunnel.
To enabled VPN Egress on you Network please check this guide we have: https://openvpn.net/cloud-docs/adding-vpn-egress/?

For more information with OpenVPN Cloud Split tunnel configuration/setup. Check this link: https://openvpn.net/cloud-docs/split-tunnel/

Regards,
Crowley

Dana_54

pchernoff wrote I created my first Network in OpenVPN Cloud. I used the default Split Tunnel On. Since the VPN is on the Internet it makes sense to set Split Tunnel Off. I don't see a way to make that change. Do I need to create a new network with Split Tunnel Off?
NomNomNow
The normal reason for turning it off is to minimize the VPN traffic going into the office LAN. But since only office traffic would go to the office anyway I prefer providing the greater protection. Unless I misunderstand.

To disable split tunneling, go to the same place and enable Use default gateway on remote network. This method can be used to remotely connect to another PC, in order to access files through VPN and use the remote LAN resources while also staying connected to your home network.