Routing specific IP's over VPN

yasar11732

Hi,

I have setup OpenVPN on my workplace server. I can successfully access webservices and shared folders (windows) over VPN.

One of the programs I use for work need to access a specific server that can only be accessed from my office's IP address. I have determined destination IP address using WireShark program.

Can I setup OpenVPN in a way that, requests going for aforementioned server routed over openVPN?

I don't want to route all my internet traffic over vpn if possible,

Thanks in advance

300000

Yes you can route only network you like and the rest go to your local network.on you client open it and add this one.

route 0.0.0.0 192.0.0.0 net_gateway
route 64.0.0.0 192.0.0.0 net_gateway
route 128.0.0.0 192.0.0.0 net_gateway
route 192.0.0.0 192.0.0.0 net_gateway

This part is use your local network .if you need route some network over vpn you can do this .

67.98.89.76 255.255.255.252 67.98.89.70

route 67.98.89.76 255.255.255.252 vpn _gateway

vpn_gateway must be lease it like that so openvpn can add gareway on fly. Just correct ip and subnet you want to route only.

Aufderhar

Step 1: select your VPN configuration.
Step 2: go over to the relevant tab (either IPv4 or IPv6)
Step 3: Click the "Routes..." ...
Step 4: Add your desired route (in this case it is redirecting all traffic from 192.168.0.* through the VPN.

Aufderhar

Aufderhar wrote Step 1: select your VPN configuration jcpenney kiosk.
Step 2: go over to the relevant tab (either IPv4 or IPv6)
Step 3: Click the "Routes..." ...
Step 4: Add your desired route (in this case it is redirecting all traffic from 192.168.0.* through the VPN.

I hope this is help others.