ReactiveBlaze
I am attmpting to configure OpenVPN so that when people connect to it they are able to access anything behind the VPN but keep their Public IP intact. I have figured this out but now want to be able to access remote clients from LAN through the VPN. right now clients who connect can connect to any server/computer on LAN but no computer/server on LAN is able to talk to any clients connected to the VPN.
10.8.0.0 - VPN172.16.0.0 - LAN
Here is the Server config:
port 2019
proto tcp
dev tun
user nobody
group nogroup
persist-key
persist-tun
keepalive 10 120
topology subnet
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "route 172.16.0.0 255.255.252.0"
#push "dhcp-option DNS 1.0.0.1"
push "dhcp-option DNS 172.16.0.10"
push "dhcp-option DNS 1.1.1.1"
#push "redirect-gateway def1 bypass-dhcp"
dh none
ecdh-curve prime256v1
tls-crypt tls-crypt.key 0
crl-verify crl.pem
ca ca.crt
cert server.crt
key server.key
auth SHA256
cipher AES-128-GCM
ncp-ciphers AES-128-GCM
tls-server
tls-version-min 1.2
tls-cipher TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256
client-config-dir /etc/openvpn/ccd
status /var/log/openvpn/status.log
verb 3
persist-remote-ip
float
When attempting to connect to a network share on a computer on the VPN say "10.8.0.2" I get "The network path was not found". Computer 10.8.0.2 is able to access anything on the 172.16.0.0 network just fine. Am I missing something from here to route the remote computers to be accessible from LAN?
