Hello!
Without wasting time for anyone, I've tried a lot of stuff.
I am trying to setup a VPN server so I could connect from home to work via OpenVPN using IPv6.
Honestly, I am stuck using IPv6, don't have that much experience with it.
Anyways, I'll try to explain my steps.
I've build keys and setup everything so far.
Now I am trying to edit ther server.conf
proto udp6
dev tun
ca ca.crt
cert server.crt
key server.key
dh dh2048.pem
server 192.168.0.20 255.255.255.0 (router ip)
server-ipv6
push "route 192.168.0.25 255.255.255.0" (raspberry)
push "route 0.0.0.0 0.0.0.0" (loopback)
push "route-ipv6 fd00::/64" (loopback)
push "route-ipv6 " (I don't know)
push "route-ipv6 2000::/3" (I don't know)
push "dhcp-option DNS 192.168.0.10" (server)
push "dchp-option DNS6 fd00::3631:c4ff:fef8:xxxx" (server I assume)
keepalive 10 120
verb 3
Obviously, I need to enter an IPv6 address. Using
ip a I can see that eth0 has the IP:
inet6 fe80::6a34:da2d:e98e:XXXX/64.
What do I have to enter into the server.conf? I don't really understand what the tutorial wants from me.
I used
IPv6 in OpenVPN from the wiki.
Any help would be appreciated!
