Austin-Powers Hello, please help. I installed openvpn on a W10 machine. I did all installation steps correctly. The client can connect, the status is green. But, the client can not ping or access any machine (computer, nas, printer...) in the local network. I not understand why. The Windows 10 VPNServer is behind a Internet Router. On the router is a portforwarding for UDP packets to the internal IP-address. Here my configs: Server: - VPN TAP Adapter is set to "privat network" - Windows Firewall UDP port incomming to VPNServer is active - Windows Firewall echo ICMPv3 incomming is active - Windows Firewall SMB incomming is active - WIndows service "routing & ras" is activated and started ################################################# # OpenVPN (xxxx - Conf) # VPN Server Configuration # # Copyright 2006-2020 (01.07.2020) # Company xxxx ################################################# local 192.168.1.20 #this is the windows10 machine with the openvpn server installed on it port 39222 proto udp dev tun # ---------------------------------------------- # Zertifikate # ---------------------------------------------- dh "C:\\Programme\\OpenVPN\\server-keys\\dh2048.pem" ca "C:\\Programme\\OpenVPN\\server-keys\\ca.crt" cert "C:\\Programme\\OpenVPN\\server-keys\\server.crt" key "C:\\Programme\\OpenVPN\\server-keys\\server.key" # ---------------------------------------------- # Server-Setup # ---------------------------------------------- server 10.0.15.0 255.255.255.0 #this is the network for vpn-clients ifconfig-pool-persist "C:\\Programme\\OpenVPN\\ipp.txt" client-to-client # ---------------------------------------------- # Client-Settings (inkl Special Dir)Files # ---------------------------------------------- client-config-dir "C:\\Programme\\OpenVPN\\ccd" push "route 192.168.1.0 255.255.255.0" #the 192.168.1.0 is the local network where the openvpn server and other machines located push "dhcp-option DNS 192.168.1.254" #192.168.1.254 is the local router and dns-gateway to internet # ---------------------------------------------- # Defaults # ---------------------------------------------- keepalive 10 120 compress lz4 persist-key persist-tun # ---------------------------------------------- # Logging # ---------------------------------------------- status "C:\\Programme\\OpenVPN\\log\\openvpn-status.log" log "C:\\Programme\\OpenVPN\\log\\openvpn.log" log-append "C:\\Programme\\OpenVPN\\log\\openvpn.log" verb 3 auth-user-pass-verify "C:\\Programme\\OpenVPN\\config\\auth.bat" via-env script-security 3 ###END### Client Configuration: ###################################### # Company OpenVPN ClientScript # ###################################### client dev tun proto udp remote xxxxxxxx 39222 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\Keys\\Zierer-Server!\\ca.crt" cert "C:\\Program Files\\OpenVPN\\Keys\\Zierer-Server!\\lap-zierer01.crt" key "C:\\Program Files\\OpenVPN\\Keys\\Zierer-Server!\\lap-zierer01.key" compress lz4 #verb 3 ###END### Remember, I can connect from the client to the server, the connection is ok and the status in openvpn is green. I can not ping any destination in the server Network or use a share from a nas for example. What I do wrong, what I forgot to do, what is the problem, I not understand. I want to have access from the client to all local IP-addresses and machines like windows machine (the server openvpn itself, nas, printer...) And other clients should see each other. Please help, thanks. Alex
Austin-Powers hmmm no one can help me? I have realy a problem with that, can not do my work because vpn not working. Please help. Thanks.
TinCanTech Austin-Powers wrote can not do my work I am available for hire: tincanteksup <at> gmail dot com
