Hy
Currently i installed an OpenVPN instance on a server in my lcoal network (192.168.1.0/24)
The Server has the static IP 192.168.1.200
I was able to add those settings to the server.conf
push "route 192.168.100.0 255.255.255.0"
push "route 192.168.1.0 255.255.255.0"
route 192.168.100.0 255.255.255.0 192.168.1.200
client-to-client
With this setup as a VPN User I have access to the 192.168.1.0 Network AND I can connect to other VPN users.
Now as a last part I like to Access form the local network to the VPN users.
In the sample server conf on the github page I read about this:
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
But I'm now stuck there to route the traffic for the local subnet to the VPN server.
I habe a unifi network and can't figure out where to setup this...
Can someone help me? Thx a lot
Andy
