xayide
OpenVPN has a default that is not suitable for me. It does the below.....only I do not need the 0.0.0.0/1 and 128.0.0.0/1. I only need the last entry for the endpoint but doing 'pull-filter ignore "redirect gateway"' makes it not do any of the below...so how can I omit the default GW but still get the Endpoint route for the default gw on the firewall?
The additional routes are the result of the `redirect-gateay` option.
This adds 3 routes, the first two together span the whole internet and redirect into the tunnel:
```
dest 0.0.0.0 mask 128.0.0.0 gw 10.100.100.5
dest 128.0.0.0 mask 128.0.0.0 gw 10.100.100.5
```
These provide a "better" routing match than the default gateway (with a mask of zero) for all internet addresses.
The 3rd redirects the real VPN endpoint IP address to use the original gateway, and will be used for the encrypted VPN packets:
```
dest 185.118.18.66 mask 255.255.255.255 gw 192.168.20.254
```
TinCanTech
You would have to do it yourself ..
xayide
Thats what I've done. Although if ISP decides to change gateway it will not work ;(
I was thunking mybe to have a route-up script withe delay and delete the two routes 😉
300000
When you ve done it let post jn here so someone can learn from it
xayide
Got help over at openwrt-forum from VGAETERA
pull-filter ignore redirect-gateway
route remote_host 255.255.255.255 net_gateway
I tested it and it works.
TinCanTech
Thanks for letting us know 8-)
I must admit I forgot about remote_host ..
