Hello to Community,
I've configured openvpn on centos 8 . openvpn port is set to tcp protocol and port 443 . When I connect from client it does conencted with server . But I observer following message in my openvpn log file. I configure my client on linksys router.
linksys/x.x.x.x.:20891 MULTI: packet dropped due to output saturation (multi_process_incoming_tun)
port 443
proto tcp
dev tun
ca /etc/openvpn/server/ca.crt
cert /etc/openvpn/server/server.crt
key /etc/openvpn/server/server.key
dh /etc/openvpn/server/dh.pem
server 10.10.10.0 255.255.255.0
mode server
push "redirect-gateway def1"
push "dhcp-option DNS 208.67.220.220"
push "dhcp-option DNS 208.67.222.222"
#client-config-dir /etc/openvpn/ccd # for fixed ip assigning for client
#ifconfig-pool-persist /etc/openvpn/ipp.txt #log previous ip of cliemt
tls-auth /etc/openvpn/server/ta.key 0 # This file is secret
auth SHA256
key-direction 0
#cipher AES-256-CBC
explicit-exit-notify 0
cipher AES-256-GCM
client-to-client
#duplicate-cn
keepalive 10 120
comp-lzo
user nobody
group nobody
persist-key
persist-tun
status /var/log/openvpn-status.log
log /var/log/openvpn.log
verb 4
mute 20
client
dev tun
proto tcp
remote x.x.x.x 443 #This is serve IP
resolv-retry infinite
nobind
#duplicate-cn # it allows duplicate connections
persist-key
persist-tun
cipher AES-256-GCM
auth SHA256
remote-cert-tls server
key-direction 1
comp-lzo
auth-nocache
verb 3
tls-auth /etc/openvpn/grouter_client_ta.key 1
ca /etc/openvpn/grouter_client_ca.crt
cert/etc/openvpn/grouter_client_client.cert
How to fix this error message .
Regards
Scorpoin
