Babolca
Hello im very new to open vpn.
I would like to realize a very simple task. Connect two clients via vpn.
Therefore i installed a server on linode having an open vpn server.
And installed 2 clients.
Added the client-to-client option to the server config.
Im using the same client config file (ovpn).
For me it seems that the clients get the same ip 10.8.0.2.
Naturally on that way i cant try even a ping to the other client.
I would like to have the simpliest solution. (No route the trafic to os layer just keep everythin in openvpn server layer)
Thanks
Szabolcs
Babolca
The server config file is
local X.X.X.X
port 1194
proto udp
dev tun
ca ca.crt
cert server.crt
key server.key
dh dh.pem
auth SHA512
tls-crypt tc.key
topology subnet
server 10.8.0.0 255.255.255.0
server-ipv6 fddd:1194:1194:1194::/64
push "redirect-gateway def1 ipv6 bypass-dhcp"
ifconfig-pool-persist ipp.txt
push "dhcp-option DNS 139.162.133.5"
push "dhcp-option DNS 139.162.132.5"
push "dhcp-option DNS 139.162.130.5"
keepalive 10 120
cipher AES-256-CBC
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3
crl-verify crl.pem
explicit-exit-notify
client-to-client
both clients has this config file:
client
dev tun
proto udp
remote X.X.X.X 1194
resolv-retry infinite
nobind
persist-key
persist-tun
remote-cert-tls server
auth SHA512
cipher AES-256-CBC
ignore-unknown-option block-outside-dns
block-outside-dns
verb 3
<ca>
-----BEGIN CERTIFICATE-----
-.....
TinCanTech
See --duplicate-cn in the manual.
Also, set --verb 4 and read your server log.
