Routing or change IP range

mamelf

Good afternoon.

I just configured my VPN but I have what is a serious problem for me. I cannot access a shared resource on the network. What I need to do is be able to access 192.168.1.18 from 192.168.0.41 (and from 192.168.1.32 to 192.168.0.18 although this would be a "luxury not necessary"). The computers are all windows 10, but the IPs ending in 18 are NAS hard drives that can be accessed as a network share (\\ 192.168.1.18 and \\ 192.168.0.18 from windows explorer). The scheme of my network is as follows:

Windows 10
192.168.0.41 NAS
255.255.255.0 192.168.0.18
10.8.0.5 ------------------- 255.255.255.0
255.255.255.0
|
|
OpenVPN
|
|
Windows 10
192.168.1.32 NAS
255.255.255.0 192.168.1.18
10.8.0.1 ------------------- 255.255.255.0
255.255.255.0
I have tried to add in the server configuration file (IP 192.168.1.32)
push "route 192.168.0.0 255.255.255.0"
push "route 192.168.1.0 255.255.255.0"
route 192.168.0.0 255.255.255.0
client-to-client

and in the client configuration file (IP 192.168.0.41)
route 192.168.0.1 255.255.255.0

but I still can't access.

Can someone indicate the modifications in the client and server configuration file or give me some indications or a link to solve the problem?

Another possible solution I've thought about is assigning my VPN the IP range 192.168.1.0, but it seems to me that would give me more problems. What is your opinion?

Thank you very much in advance

TinCanTech

https://community.openvpn.net/openvpn/wiki/HOWTO

mamelf

good morning

First of all I want to apologize for putting the previous post in Spanish. I tried to locate the forum rules to see if I could do it but I couldn't find them. Either way I apologize.

I have tried to modify the lines as it puts in the link that I received, but I don't get anything.
1º Create a file in a server folder with the name of the client's certificate and adding the iroute line 192.168.0.0 255.255.255.0 (192.168.0.0 is the client's network).
2nd I added to the SERVER.OPVN file the lines:
client-config-dir "C: \\ Program Files \\ OpenVPN \\ config \\ ccd"

route 192.168.0.0 255.255.255.0
(create a folder called ccd where the previous file is)

I really don't know what modifications I should make. Can somebody help me?

Thank you

TinCanTech

mamelf wrote 1º Create a file in a server folder with the name of the client's certificate and adding the iroute line 192.168.0.0 255.255.255.0 (192.168.0.0 is the client's network).
2nd I added to the SERVER.OPVN file the lines:
client-config-dir "C: \\ Program Files \\ OpenVPN \\ config \\ ccd"

Do 2 first and put the file created in 1 in the folder created in 2

mamelf

I done in the order you have told me

TinCanTech

In order to have the client be able to see the server side LAN you need to either:

Setup the correct routing, as described in the Howto
OR use NAT - See bebop's Windows 7 example here: https://forums.openvpn.net/viewforum.php?f=7

mamelf

I beg your pardon, but I don´t understand you. I try to solved my problem in other less technical forum.

Thnak you for your help