chantme
Hi
On W10
I install my TAP with tap-windows-9.21.2.exe, it works fine.
It appears that when I boot my TAP is in use :
IP 192.168.123.1
from DHCP server : 192.168.123.2 (which does not exist on my network)
I have to desactivate/activate the TAP adapter in order to use it with OpenVPN.
Is there a way to detect in W10 which process opens and attributes an IP address to my TAP driver ?
Thank you, best
TinCanTech
OpenVPN emulates a DHCP server to configure the TAP adapter.
In your case, 192.168.123.2 is the correct address for the DHCP server. It is not ping-able by design.
chantme
It's the same behaviour when OpenVPN is not installed on the computer (I just install tap-windows-9.21.2.exe and I reboot)
Status should be grayed, and adapter should be 'Cable not connected'
Is there a way to discover wich process connects my adapter?
Thank you
TinCanTech
It is a saved configuration. If openvpn is not installed then it cannot connect to anything.
