Hello my OpenVPN mates !
Iam working on a topology in GNS3, i cant get it work how it needs to be.
Basically i have 1 OpenVPN Server and multiple Clients.
My goal is that a specific client only can connect to specific VLAN.
Client1 connect through the OpenVPN Server to VLAN1 but not VLAN2
Client2 connect through the OpenVPN Server to VLAN2 but not VLAN1
With my current configuration Both Clients can reach both VLANs through their tun0 interface.
OVPN Server
eth0:192.168.4.1
tun0:10.200.0.1
OVPN Client1
eth0:192.168.7.2
tun0:10.200.0.6
OVPN Client2
eth0:192.168.7.4
tun0:10.200.0.10
Server Config:
[oconf=]
server 10.200.0.0 255.255.255.0
dev tun
proto udp
port 1194
daemon
verb4
log-append /...
ca /...
cert /...
key /...
dh /...
[/oconf]
Client 1,2 Config (same just different certificate used)
[oconf=]
client
remote 192.168.4.1
dev tun
proto udp
port 1194
ca /...
cert /...
key /...
daemon
verb4
log-append /...
[/oconf]
Routers static routes:
Router1:
Router2:
R3:
I use OpenVPN 2.3.10 on Debian VMs.
What is needed to make it work the way i described it?
edit:
Images arent shown?
Topology:
https://ibb.co/dMPn15w
Router1:
https://ibb.co/Dp5xQP2
Router2:
https://ibb.co/N1DxSzj
R3:
https://ibb.co/DppWGqr
