When my (openVPN community edition) server configuration file runs, it hits an error.
Access freeNAS server:
# Open Terminal.app:
<admin PC>:~ <user>$ ssh root@<freeNAS console IP>
root@<freeNAS console IP>'s password:<password>
.
freeNAS server and internal openVPN jail information
root@<freeNAS PC name>:~ # uname -a
FreeBSD <freeNAS PC name>.local 11.2-STABLE FreeBSD 11.2-STABLE #0 r325575+3b66a34f3aa(HEAD): Thu Feb 14 13:40:20 EST 2019 root@nemesis.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
root@<freeNAS PC name>:~ # iocage console openVPN
.
Finding server.conf
root@openVPN:~ # egrep -v '^(;|#|//)|^$' /usr/local/etc/openvpn/server.conf
root@openVPN:~ # cd /usr/local/etc/openvpn/
root@openVPN:/usr/local/etc/openvpn # nano server.conf
.
server.conf
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################
# Which local IP address should OpenVPN
# listen on? (optional)
# Original:
#;local a.b.c.d
#(Per kypdurron5):
#local <IP address of the jail>
# Modified:
local <freeNAS server openVPN jail IP>
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port <selectedPort>
# TCP or UDP server?
;proto tcp
proto udp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
# Original:
#ca ca.crt
#cert server.crt
#key server.key # This file should be kept secret
# Modified:
ca /usr/local/etc/openvpn/keys/ca.crt
cert /usr/local/etc/openvpn/keys/openvpn-server.crt
key /usr/local/etc/openvpn/keys/openvpn-server.key
# The key file should be kept secret
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh2048.pem 2048
# Original:
#dh dh2048.pem
# Modified:
dh /usr/local/etc/openvpn/keys/dh.pem
# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
# Original:
#;topology subnet
# Modified:
topology subnet
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0
# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses. You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
# Original:
#;push "route 192.168.10.0 255.255.255.0"
#;push "route 192.168.20.0 255.255.255.0"
# Modified:
push "route 192.168.86.0 255.255.255.0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
# Original:
#;push "redirect-gateway def1 bypass-dhcp"
# Modified:
;push "redirect-gateway def1 bypass-dhcp"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
#
http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
# Original:
#tls-auth ta.key 0 # This file is secret
# Modified:
tls-auth /usr/local/etc/openvpn/keys/ta.key 0 # This file is secret
remote-cert-tls client
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
# Note that v2.4 client/server will automatically
# negotiate AES-256-GCM in TLS mode.
# See also the ncp-cipher option in the manpage
cipher AES-256-CBC
# Enable compression on the VPN link and push the
# option to the client (v2.4+ only, for earlier
# versions see below)
# Original:
#;compress lz4-v2
#;push "compress lz4-v2"
# Modified:
;compress lz4-v2
;push "compress lz4-v2"
# For compression compatible with older clients use comp-lzo
# If you enable it here, you must also
# enable it in the client config file.
;comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
# Original:
#;user nobody
#;group nobody
# Modified:
user nobody
group nobody
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
# Original:
#;log openvpn.log
#;log-append openvpn.log
# Modified
;log openvpn.log
;log-append openvpn.log
# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
# Original:
#verb 3
# Modified:
verb 4
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20
# Notify the client that when the server restarts so it
# can automatically reconnect.
explicit-exit-notify 1
.
When my (openVPN community edition) server configuration file runs, it hits an error.
Access freeNAS server:
# Open Terminal.app:
<admin PC>:~ <user>$ ssh root@<freeNAS console IP>
root@<freeNAS console IP>'s password:<password>
.
freeNAS server and internal openVPN jail information
root@<freeNAS PC name>:~ # uname -a
FreeBSD <freeNAS PC name>.local 11.2-STABLE FreeBSD 11.2-STABLE #0 r325575+3b66a34f3aa(HEAD): Thu Feb 14 13:40:20 EST 2019 root@nemesis.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
root@<freeNAS PC name>:~ # iocage console openVPN
root@openVPN:~ # uname -a
FreeBSD openVPN 11.2-STABLE FreeBSD 11.2-STABLE #0 r325575+3b66a34f3aa(HEAD): Thu Feb 14 13:40:20 EST 2019 root@nemesis.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
.
Finding server.conf
root@openVPN:~ # egrep -v '^(;|#|//)|^$' /usr/local/etc/openvpn/server.conf
root@openVPN:~ # cd /usr/local/etc/openvpn/
root@openVPN:/usr/local/etc/openvpn # nano server.conf
.
server.conf
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################
# Which local IP address should OpenVPN
# listen on? (optional)
# Original:
#;local a.b.c.d
#(Per kypdurron5):
#local <IP address of the jail>
# Modified:
local <freeNAS server openVPN jail IP>
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port <selectedPort>
# TCP or UDP server?
;proto tcp
proto udp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
# Original:
#ca ca.crt
#cert server.crt
#key server.key # This file should be kept secret
# Modified:
ca /usr/local/etc/openvpn/keys/ca.crt
cert /usr/local/etc/openvpn/keys/openvpn-server.crt
key /usr/local/etc/openvpn/keys/openvpn-server.key
# The key file should be kept secret
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh2048.pem 2048
# Original:
#dh dh2048.pem
# Modified:
dh /usr/local/etc/openvpn/keys/dh.pem
# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
# Original:
#;topology subnet
# Modified:
topology subnet
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0
# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses. You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
# Original:
#;push "route 192.168.10.0 255.255.255.0"
#;push "route 192.168.20.0 255.255.255.0"
# Modified:
push "route 192.168.86.0 255.255.255.0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
# Original:
#;push "redirect-gateway def1 bypass-dhcp"
# Modified:
;push "redirect-gateway def1 bypass-dhcp"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
#
http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
# Original:
#tls-auth ta.key 0 # This file is secret
# Modified:
tls-auth /usr/local/etc/openvpn/keys/ta.key 0 # This file is secret
remote-cert-tls client
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
# Note that v2.4 client/server will automatically
# negotiate AES-256-GCM in TLS mode.
# See also the ncp-cipher option in the manpage
cipher AES-256-CBC
# Enable compression on the VPN link and push the
# option to the client (v2.4+ only, for earlier
# versions see below)
# Original:
#;compress lz4-v2
#;push "compress lz4-v2"
# Modified:
;compress lz4-v2
;push "compress lz4-v2"
# For compression compatible with older clients use comp-lzo
# If you enable it here, you must also
# enable it in the client config file.
;comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
# Original:
#;user nobody
#;group nobody
# Modified:
user nobody
group nobody
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
# Original:
#;log openvpn.log
#;log-append openvpn.log
# Modified
;log openvpn.log
;log-append openvpn.log
# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
# Original:
#verb 3
# Modified:
verb 4
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20
# Notify the client that when the server restarts so it
# can automatically reconnect.
explicit-exit-notify 1
.
ifconfig
root@<freeNAS PC>:~ # ifconfig
em0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
ether 0c:c4:7a:90:df:c3
hwaddr 0c:c4:7a:90:df:c3
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 0c:c4:7a:90:df:c2
hwaddr 0c:c4:7a:90:df:c2
inet 192.168.86.3 netmask 0xffffff00 broadcast 192.168.86.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:f7:27:82:b9:00
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: vnet0:3 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 7 priority 128 path cost 2000
member: vnet0:2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 6 priority 128 path cost 2000
member: vnet0:1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 2000
vnet0:1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: associated with jail: plex as nic: epair0b
options=8<VLAN_MTU>
ether 02:ff:60:14:fa:09
hwaddr 02:5d:d0:00:05:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
vnet0:2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: associated with jail: openVPN as nic: epair0b
options=8<VLAN_MTU>
ether 02:ff:60:c1:31:6e
hwaddr 02:5d:d0:00:06:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
vnet0:3: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: associated with jail: transmission as nic: epair0b
options=8<VLAN_MTU>
ether 02:ff:60:03:aa:46
hwaddr 02:5d:d0:00:07:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
root@<freeNAS PC>:~ # iocage console openVPN
root@openVPN:~ # ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:ff:60:c1:31:6f
hwaddr 02:5d:d0:00:07:0b
inet 192.168.86.8 netmask 0xffffff00 broadcast 192.168.86.255
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
options=80000<LINKSTATE>
inet 10.8.0.1 --> 10.8.0.2 netmask 0xffffff00
nd6 options=1<PERFORMNUD>
groups: tun
Opened by PID 4450
.
openvpn.log
Mon Feb 18 13:40:37 2019 us=533867 Current Parameter Settings:
Mon Feb 18 13:40:37 2019 us=533988 config = '/usr/local/etc/openvpn/openvpn.conf'
Mon Feb 18 13:40:37 2019 us=533996 mode = 1
Mon Feb 18 13:40:37 2019 us=534002 show_ciphers = DISABLED
Mon Feb 18 13:40:37 2019 us=534008 show_digests = DISABLED
Mon Feb 18 13:40:37 2019 us=534014 show_engines = DISABLED
Mon Feb 18 13:40:37 2019 us=534020 genkey = DISABLED
Mon Feb 18 13:40:37 2019 us=534025 key_pass_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534031 show_tls_ciphers = DISABLED
Mon Feb 18 13:40:37 2019 us=534037 connect_retry_max = 0
Mon Feb 18 13:40:37 2019 us=534043 Connection profiles [0]:
Mon Feb 18 13:40:37 2019 us=534049 proto = udp
Mon Feb 18 13:40:37 2019 us=534055 local = '192.168.86.8'
Mon Feb 18 13:40:37 2019 us=534061 local_port = '1194'
Mon Feb 18 13:40:37 2019 us=534067 remote = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534072 remote_port = '1194'
Mon Feb 18 13:40:37 2019 us=534078 remote_float = DISABLED
Mon Feb 18 13:40:37 2019 us=534085 bind_defined = DISABLED
Mon Feb 18 13:40:37 2019 us=534091 bind_local = ENABLED
Mon Feb 18 13:40:37 2019 us=534096 bind_ipv6_only = DISABLED
Mon Feb 18 13:40:37 2019 us=534102 connect_retry_seconds = 5
Mon Feb 18 13:40:37 2019 us=534108 connect_timeout = 120
Mon Feb 18 13:40:37 2019 us=534114 socks_proxy_server = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534120 socks_proxy_port = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534125 tun_mtu = 1500
Mon Feb 18 13:40:37 2019 us=534131 tun_mtu_defined = ENABLED
Mon Feb 18 13:40:37 2019 us=534137 link_mtu = 1500
Mon Feb 18 13:40:37 2019 us=534143 link_mtu_defined = DISABLED
Mon Feb 18 13:40:37 2019 us=534149 tun_mtu_extra = 0
Mon Feb 18 13:40:37 2019 us=534154 tun_mtu_extra_defined = DISABLED
Mon Feb 18 13:40:37 2019 us=534160 mtu_discover_type = -1
Mon Feb 18 13:40:37 2019 us=534166 fragment = 0
Mon Feb 18 13:40:37 2019 us=534172 mssfix = 1450
Mon Feb 18 13:40:37 2019 us=534177 explicit_exit_notification = 1
Mon Feb 18 13:40:37 2019 us=534183 Connection profiles END
Mon Feb 18 13:40:37 2019 us=534189 remote_random = DISABLED
Mon Feb 18 13:40:37 2019 us=534195 ipchange = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534200 dev = 'tun'
Mon Feb 18 13:40:37 2019 us=534206 dev_type = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534212 dev_node = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534218 lladdr = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534223 topology = 3
Mon Feb 18 13:40:37 2019 us=534229 ifconfig_local = '10.8.0.1'
Mon Feb 18 13:40:37 2019 us=534235 ifconfig_remote_netmask = '255.255.255.0'
Mon Feb 18 13:40:37 2019 us=534241 ifconfig_noexec = DISABLED
Mon Feb 18 13:40:37 2019 us=534247 ifconfig_nowarn = DISABLED
Mon Feb 18 13:40:37 2019 us=534253 ifconfig_ipv6_local = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534258 ifconfig_ipv6_netbits = 0
Mon Feb 18 13:40:37 2019 us=534264 ifconfig_ipv6_remote = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534270 shaper = 0
Mon Feb 18 13:40:37 2019 us=534276 mtu_test = 0
Mon Feb 18 13:40:37 2019 us=534282 mlock = DISABLED
Mon Feb 18 13:40:37 2019 us=534287 keepalive_ping = 10
Mon Feb 18 13:40:37 2019 us=534293 keepalive_timeout = 120
Mon Feb 18 13:40:37 2019 us=534299 inactivity_timeout = 0
Mon Feb 18 13:40:37 2019 us=534304 ping_send_timeout = 10
Mon Feb 18 13:40:37 2019 us=534310 ping_rec_timeout = 240
Mon Feb 18 13:40:37 2019 us=534316 ping_rec_timeout_action = 2
Mon Feb 18 13:40:37 2019 us=534322 ping_timer_remote = DISABLED
Mon Feb 18 13:40:37 2019 us=534327 remap_sigusr1 = 0
Mon Feb 18 13:40:37 2019 us=534333 persist_tun = ENABLED
Mon Feb 18 13:40:37 2019 us=534339 persist_local_ip = DISABLED
Mon Feb 18 13:40:37 2019 us=534345 persist_remote_ip = DISABLED
Mon Feb 18 13:40:37 2019 us=534351 persist_key = ENABLED
Mon Feb 18 13:40:37 2019 us=534356 passtos = DISABLED
Mon Feb 18 13:40:37 2019 us=534362 resolve_retry_seconds = 1000000000
Mon Feb 18 13:40:37 2019 us=534368 resolve_in_advance = DISABLED
Mon Feb 18 13:40:37 2019 us=534374 username = 'nobody'
Mon Feb 18 13:40:37 2019 us=534380 groupname = 'nobody'
Mon Feb 18 13:40:37 2019 us=534385 chroot_dir = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534391 cd_dir = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534397 writepid = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534403 up_script = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534408 down_script = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534414 down_pre = DISABLED
Mon Feb 18 13:40:37 2019 us=534420 up_restart = DISABLED
Mon Feb 18 13:40:37 2019 us=534425 up_delay = DISABLED
Mon Feb 18 13:40:37 2019 us=534431 daemon = DISABLED
Mon Feb 18 13:40:37 2019 us=534437 inetd = 0
Mon Feb 18 13:40:37 2019 us=534443 log = ENABLED
Mon Feb 18 13:40:37 2019 us=534449 suppress_timestamps = DISABLED
Mon Feb 18 13:40:37 2019 us=534455 machine_readable_output = DISABLED
Mon Feb 18 13:40:37 2019 us=534460 nice = 0
Mon Feb 18 13:40:37 2019 us=534466 verbosity = 6
Mon Feb 18 13:40:37 2019 us=534472 mute = 0
Mon Feb 18 13:40:37 2019 us=534477 gremlin = 0
Mon Feb 18 13:40:37 2019 us=534483 status_file = 'openvpn-status.log'
Mon Feb 18 13:40:37 2019 us=534489 status_file_version = 1
Mon Feb 18 13:40:37 2019 us=534494 status_file_update_freq = 60
Mon Feb 18 13:40:37 2019 us=534500 occ = ENABLED
Mon Feb 18 13:40:37 2019 us=534506 rcvbuf = 0
Mon Feb 18 13:40:37 2019 us=534512 sndbuf = 0
Mon Feb 18 13:40:37 2019 us=534518 sockflags = 0
Mon Feb 18 13:40:37 2019 us=534523 fast_io = DISABLED
Mon Feb 18 13:40:37 2019 us=534529 comp.alg = 11
Mon Feb 18 13:40:37 2019 us=534535 comp.flags = 0
Mon Feb 18 13:40:37 2019 us=534541 route_script = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534547 route_default_gateway = '10.8.0.2'
Mon Feb 18 13:40:37 2019 us=534552 route_default_metric = 0
Mon Feb 18 13:40:37 2019 us=534558 route_noexec = DISABLED
Mon Feb 18 13:40:37 2019 us=534564 route_delay = 0
Mon Feb 18 13:40:37 2019 us=534570 route_delay_window = 30
Mon Feb 18 13:40:37 2019 us=534575 route_delay_defined = DISABLED
Mon Feb 18 13:40:37 2019 us=534581 route_nopull = DISABLED
Mon Feb 18 13:40:37 2019 us=534587 route_gateway_via_dhcp = DISABLED
Mon Feb 18 13:40:37 2019 us=534594 allow_pull_fqdn = DISABLED
Mon Feb 18 13:40:37 2019 us=534600 management_addr = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534606 management_port = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534612 management_user_pass = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534618 management_log_history_cache = 250
Mon Feb 18 13:40:37 2019 us=534623 management_echo_buffer_size = 100
Mon Feb 18 13:40:37 2019 us=534629 management_write_peer_info_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534635 management_client_user = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534641 management_client_group = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534647 management_flags = 0
Mon Feb 18 13:40:37 2019 us=534652 shared_secret_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534658 key_direction = 0
Mon Feb 18 13:40:37 2019 us=534664 ciphername = 'AES-256-CBC'
Mon Feb 18 13:40:37 2019 us=534670 ncp_enabled = ENABLED
Mon Feb 18 13:40:37 2019 us=534675 ncp_ciphers = 'AES-256-GCM:AES-128-GCM'
Mon Feb 18 13:40:37 2019 us=534681 authname = 'SHA1'
Mon Feb 18 13:40:37 2019 us=534687 prng_hash = 'SHA1'
Mon Feb 18 13:40:37 2019 us=534693 prng_nonce_secret_len = 16
Mon Feb 18 13:40:37 2019 us=534698 keysize = 0
Mon Feb 18 13:40:37 2019 us=534704 engine = DISABLED
Mon Feb 18 13:40:37 2019 us=534709 replay = ENABLED
Mon Feb 18 13:40:37 2019 us=534715 mute_replay_warnings = DISABLED
Mon Feb 18 13:40:37 2019 us=534721 replay_window = 64
Mon Feb 18 13:40:37 2019 us=534726 replay_time = 15
Mon Feb 18 13:40:37 2019 us=534732 packet_id_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534738 use_iv = ENABLED
Mon Feb 18 13:40:37 2019 us=534743 test_crypto = DISABLED
Mon Feb 18 13:40:37 2019 us=534749 tls_server = ENABLED
Mon Feb 18 13:40:37 2019 us=534755 tls_client = DISABLED
Mon Feb 18 13:40:37 2019 us=534760 key_method = 2
Mon Feb 18 13:40:37 2019 us=534766 ca_file = '/usr/local/etc/openvpn/keys/ca.crt'
Mon Feb 18 13:40:37 2019 us=534772 ca_path = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534777 dh_file = '/usr/local/etc/openvpn/keys/dh.pem'
Mon Feb 18 13:40:37 2019 us=534783 cert_file = '/usr/local/etc/openvpn/keys/openvpn-server.crt'
Mon Feb 18 13:40:37 2019 us=534789 extra_certs_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534795 priv_key_file = '/usr/local/etc/openvpn/keys/openvpn-server.key'
Mon Feb 18 13:40:37 2019 us=534801 pkcs12_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534806 cipher_list = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534812 tls_cert_profile = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534817 tls_verify = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534823 tls_export_cert = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534829 verify_x509_type = 0
Mon Feb 18 13:40:37 2019 us=534835 verify_x509_name = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534840 crl_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=534846 ns_cert_type = 0
Mon Feb 18 13:40:37 2019 us=534852 remote_cert_ku[i] = 65535
Mon Feb 18 13:40:37 2019 us=534857 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534863 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534868 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534874 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534879 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534885 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534890 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534896 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534901 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534907 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534912 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534918 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534923 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534929 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534935 remote_cert_ku[i] = 0
Mon Feb 18 13:40:37 2019 us=534940 remote_cert_eku = 'TLS Web Client Authentication'
Mon Feb 18 13:40:37 2019 us=534946 ssl_flags = 0
Mon Feb 18 13:40:37 2019 us=534952 tls_timeout = 2
Mon Feb 18 13:40:37 2019 us=534957 renegotiate_bytes = -1
Mon Feb 18 13:40:37 2019 us=534963 renegotiate_packets = 0
Mon Feb 18 13:40:37 2019 us=534969 renegotiate_seconds = 3600
Mon Feb 18 13:40:37 2019 us=534974 handshake_window = 60
Mon Feb 18 13:40:37 2019 us=534980 transition_window = 3600
Mon Feb 18 13:40:37 2019 us=534986 single_session = DISABLED
Mon Feb 18 13:40:37 2019 us=534992 push_peer_info = DISABLED
Mon Feb 18 13:40:37 2019 us=534997 tls_exit = DISABLED
Mon Feb 18 13:40:37 2019 us=535003 tls_auth_file = '/usr/local/etc/openvpn/keys/ta.key'
Mon Feb 18 13:40:37 2019 us=535009 tls_crypt_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535015 server_network = 10.8.0.0
Mon Feb 18 13:40:37 2019 us=535021 server_netmask = 255.255.255.0
Mon Feb 18 13:40:37 2019 us=535028 server_network_ipv6 = ::
Mon Feb 18 13:40:37 2019 us=535034 server_netbits_ipv6 = 0
Mon Feb 18 13:40:37 2019 us=535041 server_bridge_ip = 0.0.0.0
Mon Feb 18 13:40:37 2019 us=535047 server_bridge_netmask = 0.0.0.0
Mon Feb 18 13:40:37 2019 us=535053 server_bridge_pool_start = 0.0.0.0
Mon Feb 18 13:40:37 2019 us=535060 server_bridge_pool_end = 0.0.0.0
Mon Feb 18 13:40:37 2019 us=535066 push_entry = 'route 192.168.86.0 255.255.255.0'
Mon Feb 18 13:40:37 2019 us=535072 push_entry = 'compress lz4-v2'
Mon Feb 18 13:40:37 2019 us=535077 push_entry = 'route-gateway 10.8.0.1'
Mon Feb 18 13:40:37 2019 us=535083 push_entry = 'topology subnet'
Mon Feb 18 13:40:37 2019 us=535089 push_entry = 'ping 10'
Mon Feb 18 13:40:37 2019 us=535094 push_entry = 'ping-restart 120'
Mon Feb 18 13:40:37 2019 us=535100 ifconfig_pool_defined = ENABLED
Mon Feb 18 13:40:37 2019 us=535106 ifconfig_pool_start = 10.8.0.2
Mon Feb 18 13:40:37 2019 us=535113 ifconfig_pool_end = 10.8.0.253
Mon Feb 18 13:40:37 2019 us=535119 ifconfig_pool_netmask = 255.255.255.0
Mon Feb 18 13:40:37 2019 us=535125 ifconfig_pool_persist_filename = 'ipp.txt'
Mon Feb 18 13:40:37 2019 us=535131 ifconfig_pool_persist_refresh_freq = 600
Mon Feb 18 13:40:37 2019 us=535136 ifconfig_ipv6_pool_defined = DISABLED
Mon Feb 18 13:40:37 2019 us=535142 ifconfig_ipv6_pool_base = ::
Mon Feb 18 13:40:37 2019 us=535148 ifconfig_ipv6_pool_netbits = 0
Mon Feb 18 13:40:37 2019 us=535154 n_bcast_buf = 256
Mon Feb 18 13:40:37 2019 us=535160 tcp_queue_limit = 64
Mon Feb 18 13:40:37 2019 us=535166 real_hash_size = 256
Mon Feb 18 13:40:37 2019 us=535171 virtual_hash_size = 256
Mon Feb 18 13:40:37 2019 us=535177 client_connect_script = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535183 learn_address_script = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535189 client_disconnect_script = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535194 client_config_dir = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535200 ccd_exclusive = DISABLED
Mon Feb 18 13:40:37 2019 us=535206 tmp_dir = '/tmp'
Mon Feb 18 13:40:37 2019 us=535211 push_ifconfig_defined = DISABLED
Mon Feb 18 13:40:37 2019 us=535218 push_ifconfig_local = 0.0.0.0
Mon Feb 18 13:40:37 2019 us=535224 push_ifconfig_remote_netmask = 0.0.0.0
Mon Feb 18 13:40:37 2019 us=535230 push_ifconfig_ipv6_defined = DISABLED
Mon Feb 18 13:40:37 2019 us=535235 push_ifconfig_ipv6_local = ::/0
Mon Feb 18 13:40:37 2019 us=535241 push_ifconfig_ipv6_remote = ::
Mon Feb 18 13:40:37 2019 us=535247 enable_c2c = DISABLED
Mon Feb 18 13:40:37 2019 us=535253 duplicate_cn = DISABLED
Mon Feb 18 13:40:37 2019 us=535259 cf_max = 0
Mon Feb 18 13:40:37 2019 us=535264 cf_per = 0
Mon Feb 18 13:40:37 2019 us=535270 max_clients = 1024
Mon Feb 18 13:40:37 2019 us=535276 max_routes_per_client = 256
Mon Feb 18 13:40:37 2019 us=535282 auth_user_pass_verify_script = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535288 auth_user_pass_verify_script_via_file = DISABLED
Mon Feb 18 13:40:37 2019 us=535293 auth_token_generate = DISABLED
Mon Feb 18 13:40:37 2019 us=535299 auth_token_lifetime = 0
Mon Feb 18 13:40:37 2019 us=535305 port_share_host = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535311 port_share_port = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535316 client = DISABLED
Mon Feb 18 13:40:37 2019 us=535322 pull = DISABLED
Mon Feb 18 13:40:37 2019 us=535328 auth_user_pass_file = '[UNDEF]'
Mon Feb 18 13:40:37 2019 us=535334 OpenVPN 2.4.6 amd64-portbld-freebsd11.2 [SSL (OpenSSL)] [LZO] [LZ4] [MH/RECVDA] [AEAD] built on Nov 29 2018
Mon Feb 18 13:40:37 2019 us=535342 library versions: OpenSSL 1.0.2o-freebsd 27 Mar 2018, LZO 2.10
Mon Feb 18 13:40:37 2019 us=535689 Diffie-Hellman initialized with 2048 bit key
Mon Feb 18 13:40:37 2019 us=536040 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Mon Feb 18 13:40:37 2019 us=536051 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Mon Feb 18 13:40:37 2019 us=536062 TLS-Auth MTU parms [ L:1622 D:1184 EF:66 EB:0 ET:0 EL:3 ]
Mon Feb 18 13:40:37 2019 us=536381 TUN/TAP device /dev/tun1 opened
Mon Feb 18 13:40:37 2019 us=536393 do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Mon Feb 18 13:40:37 2019 us=536407 /sbin/ifconfig tun1 10.8.0.1 10.8.0.2 mtu 1500 netmask 255.255.255.0 up
Mon Feb 18 13:40:37 2019 us=537288 /sbin/route add -net 10.8.0.0 10.8.0.2 255.255.255.0
add net 10.8.0.0: gateway 10.8.0.2 fib 0: route already in table
Mon Feb 18 13:40:37 2019 us=537997 ERROR: FreeBSD route add command failed: external program exited with error status: 1
Mon Feb 18 13:40:37 2019 us=538032 Data Channel MTU parms [ L:1622 D:1450 EF:122 EB:406 ET:0 EL:3 ]
Mon Feb 18 13:40:37 2019 us=538253 Could not determine IPv4/IPv6 protocol. Using AF_INET
Mon Feb 18 13:40:37 2019 us=538269 Socket Buffers: R=[42080->42080] S=[9216->9216]
Mon Feb 18 13:40:37 2019 us=538286 TCP/UDP: Socket bind failed on local address [AF_INET]192.168.86.8:1194: Address already in use (errno=48)
Mon Feb 18 13:40:37 2019 us=538294 Exiting due to fatal error
Mon Feb 18 13:40:37 2019 us=538307 Closing TUN/TAP interface
Mon Feb 18 13:40:37 2019 us=538329 /sbin/ifconfig tun1 destroy
Mon Feb 18 13:46:23 2019 us=609981 event_wait : Interrupted system call (code=4)
Mon Feb 18 13:46:25 2019 us=633500 TCP/UDP: Closing socket
Mon Feb 18 13:46:25 2019 us=633542 Closing TUN/TAP interface
Mon Feb 18 13:46:25 2019 us=633630 /sbin/ifconfig tun0 destroy
ifconfig: SIOCIFDESTROY: Operation not permitted
Mon Feb 18 13:46:25 2019 us=634658 FreeBSD 'destroy tun interface' failed (non-critical): external program exited with error status: 1
Mon Feb 18 13:46:25 2019 us=634697 SIGTERM[hard,] received, process exiting