karimbernardet
Hi
I have setup a VPN server with private IP 10.0.35.10. On this server, I can reach subnet 10.0.13.0/24; for example ssh, ping work for 10.0.13.10. If I run a client on my laptop, I can connect to 10.0.35.10 but I can not on 10.0.13.10.
The server.conf is like
port xxxx
proto tcp
dev tun
ca keys/ca.crt
cert keys/xxxx.crt
key keys/xxxx.key # This file should be kept secret
dh keys/dh2048.pem
server 192.168.254.0 255.255.255.0
push "route 10.0.13.0 255.255.255.255"
push "route 10.0.35.0 255.255.255.0"
client-config-dir ccd
client-to-client
keepalive 10 120
comp-lzo
persist-key
persist-tun
status openvpn-status.log
log openvpn.log
log-append openvpn.log
verb 3
On the server, the routes are :
Destination Passerelle Genmask Indic Metric Ref Use Iface
0.0.0.0 10.0.35.1 0.0.0.0 UG 0 0 0 eth0
10.0.13.0 10.0.35.1 255.255.255.0 UG 0 0 0 eth0
10.0.35.0 0.0.0.0 255.255.255.224 U 0 0 0 eth0
192.168.254.0 192.168.254.2 255.255.255.0 UG 0 0 0 tun0
192.168.254.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
On the VPN client (my laptop) :
Destination Passerelle Genmask Indic Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 600 0 0 wlp2s0
10.0.13.0 192.168.254.102 255.255.255.255 UGH 0 0 0 tun0
10.0.35.0 192.168.254.102 255.255.255.0 UG 0 0 0 tun0
192.168.1.0 0.0.0.0 255.255.255.0 U 600 0 0 wlp2s0
192.168.254.0 192.168.254.102 255.255.255.0 UG 0 0 0 tun0
192.168.254.102 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
Thanks for any hint
Karim
