johnparLE
Hi all
I have the following openvpn setup
[client 192.168.160.1]
|
[router]
|
internet
|
[openvpn server]
|
subnet 10.11.0.0/16
|
[host 10.11.17.1 and 192.168.2.250]
|
[device 192.168.2.1]
The openvpn config connects and the [client] can ping, ssh, etc to the [host] 10.11.17.1 without any problems.
I now want to reach the [device] 192.168.2.1 from the [client]. The [device] is on a private subnet connected to a second ethernet port on the [host].
The [host] can access the [device] just fine and all IP traffic works between the [host] and the [device].
I tried just adding a route on the [client] to the 192.168.2.1 subnet using the [host] on 10.11.17.1 as the gateway, but this does not work - not reachable I think the error was.
What do I need to add to the OpenVPN client or server config, or routing on the [host] to allow this to work?
Is it possible?
Thanks
John
