Hello, Is it possible to set some "include" in the client configuration? Each client has its own IP configuration, but many of them have the same routing configuration. [oconf=g8-cam5] ifconfig-push 192.168.240.18 192.168.240.17 push "route 192.168.200.0 255.255.255.0" push "route 192.168.212.0 255.255.255.0" push "route 192.168.248.28 255.255.255.255" [/oconf] I want something like this: [oconf=g8-cam5] ifconfig-push 192.168.240.18 192.168.240.17 include "g8-routing" [/oconf] [oconf=g8-routing] push "route 192.168.200.0 255.255.255.0" push "route 192.168.212.0 255.255.255.0" push "route 192.168.248.28 255.255.255.255" [/oconf] Is it possible? Or maybe this functionality will be added?

include inside client-config-dir

Elimin

Hello,

Is it possible to set some "include" in the client configuration?

Each client has its own IP configuration, but many of them have the same routing configuration.

ifconfig-push 192.168.240.18 192.168.240.17

push "route 192.168.200.0 255.255.255.0"
push "route 192.168.212.0 255.255.255.0"
push "route 192.168.248.28 255.255.255.255"

I want something like this:

ifconfig-push 192.168.240.18 192.168.240.17
include "g8-routing"

push "route 192.168.200.0 255.255.255.0"
push "route 192.168.212.0 255.255.255.0"
push "route 192.168.248.28 255.255.255.255"

Is it possible?

Or maybe this functionality will be added?

TinCanTech

Elimin wrote Is it possible to set some "include" in the client configuration?

According to the manual, --config is an allowed option in a CCD file, which essentially means:
"include" this extra config file when reading this CCD file.

Try it and see if it does what you want ..

There is also, --push-reset and --push-remove, see the manual for their usage.