TAP installer failed on Windows 10 1709 with 2.4.6

Hugo1

Installed OpenVP 2.4.6

"An error occurred installing the TAP device driver."

Windows:
Device-Manager (Error-Code 52)

Please Help me.
Thanks

TinCanTech

Windows Version:

C:\> ver

oops .. TAP installer failed on Windows 10 1709 with 2.4.6 😃

Do you have 3rd party security software like anti virus ?

If so try turning that off while trying a re-install ..

Tom7320

Hi!

Same problem here. I had this problem a couple times in the past and was always able to solve it. This time I am not. The driver installs but there is a signature problem (Code 52, little yellow exclamation mark in device manager). Thus the driver does not start and there is no tap device.

I tried to uninstall old versions, clean the registry, removed suspicious 3rd party software and so on. No success....

Is there anything else I coud try?

mhab12

same issue here. I believe the driver signing is the issue and the devs will have to correct it, otherwise you could allow unsigned drivers by following this:
https://windowsreport.com/driver-signature-enforcement-windows-10/

Tom7320

Yes I agree! It is possible to correctly install the TAP driver by disabling driver signature enforcement (solution 1). BUT you also have to disable secure boot in the UEFI BIOS settings of your computer to make it work permanently after reboot. This in turn means that bitlocker drive encrypton does only work if you are willing to type in your 40 digit key on every boot which is unacceptable. Turning off bitlocker on a business notebook is also unacceptable.

So please dear developers fix the signining issues. Unfortunately I do not know how to do it myself.... :-(

[deleted]

You're almost certainly having the same issue as here. If you can, please post your setupapi.dev.log files to that ticket so that we can be sure.

The easiest way to work around this problem is to install tap-windows6 9.21.2 from here while we figure out the proper solution.

[deleted]

Please test this installer and let me know if it works on the affected systems.

Tom7320

samuli wrote You're almost certainly having the same issue as here. If you can, please post your setupapi.dev.log files to that ticket so that we can be sure.

The easiest way to work around this problem is to install tap-windows6 9.21.2 from here while we figure out the proper solution.

Thx for the answer! Here is my setupapi.dev.log:

[Device Install Log]
     OS Version = 10.0.16299
     Service Pack = 0.0
     Suite = 0x0100
     ProductType = 1
     Architecture = amd64

[BeginLog]

[Boot Session: 2018/04/26 20:48:11.485]

>>>  [Device Install (UpdateDriverForPlugAndPlayDevices) - tap0901]
>>>  Section start 2018/04/26 20:51:35.794
      cmd: "C:\Program Files\TAP-Windows\bin\tapinstall.exe" install "C:\Program Files\TAP-Windows\driver\OemVista.inf" tap0901
     ndv: INF path: C:\Program Files\TAP-Windows\driver\OemVista.inf
     ndv: Install flags: 0x00000001
     ndv: {Update Device Driver - ROOT\NET\0000}
     ndv:      Search options: 0x00000080
     ndv:      Searching single INF 'C:\Program Files\TAP-Windows\driver\OemVista.inf'
     dvi:      {Build Driver List} 20:51:35.826
     dvi:           Searching for hardware ID(s):
     dvi:                tap0901
     dvi:           Created Driver Node:
     dvi:                HardwareID   - tap0901
     dvi:                InfName      - c:\program files\tap-windows\driver\oemvista.inf
     dvi:                DevDesc      - TAP-Windows Adapter V9
     dvi:                Section      - tap0901.ndi
     dvi:                Rank         - 0x00ff0000
     dvi:                Signer Score - Authenticode
     dvi:                DrvDate      - 04/15/2018
     dvi:                Version      - 9.0.0.22
     dvi:      {Build Driver List - exit(0x00000000)} 20:51:35.888
     dvi:      {DIF_SELECTBESTCOMPATDRV} 20:51:35.888
     dvi:           Default installer: Enter 20:51:35.888
     dvi:                {Select Best Driver}
     dvi:                     Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:                     Selected Driver:
     dvi:                          Description - TAP-Windows Adapter V9
     dvi:                          InfFile     - c:\program files\tap-windows\driver\oemvista.inf
     dvi:                          Section     - tap0901.ndi
     dvi:                {Select Best Driver - exit(0x00000000)}
     dvi:           Default installer: Exit
     dvi:      {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 20:51:35.935
     ndv:      Force Installing Driver:
     ndv:           Inf Name       - oemvista.inf
     ndv:           Driver Date    - 04/15/2018
     ndv:           Driver Version - 9.0.0.22
     ndv:      Driver package 'C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_98fc017a6cec15eb\oemvista.inf' is already imported.
     sto:      {Setup Import Driver Package: c:\program files\tap-windows\driver\oemvista.inf} 20:51:35.951
     sto:           Driver package already imported as 'oem87.inf'.
     sto:      {Setup Import Driver Package - exit (0x00000000)} 20:51:35.982
     dvi:      Searching for hardware ID(s):
     dvi:           tap0901
     dvi:      Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:      {Plug and Play Service: Device Install for ROOT\NET\0000}
     dvi:           Driver INF Path: C:\Windows\INF\oem87.inf
     dvi:           Driver Node Name: oemvista.inf:3beb73aff103cc24:tap0901.ndi:9.0.0.22:tap0901,
     dvi:           Driver Store Path: C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_98fc017a6cec15eb\oemvista.inf
     dvi:           Searching for hardware ID(s):
     dvi:                tap0901
     dvi:           Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:           {Core Device Install} 20:51:36.076
     dvi:                {Install Device - ROOT\NET\0000} 20:51:36.076
     dvi:                     Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                     Parent device: HTREE\ROOT\0
     dvi:                     {Configure Device - ROOT\NET\0000} 20:51:36.076
     dvi:                          Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                          Parent device: HTREE\ROOT\0
     sto:                          {Configure Driver Package: C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_98fc017a6cec15eb\oemvista.inf}
     sto:                               Source Filter  = tap0901
     inf:                               Class GUID     = {4d36e972-e325-11ce-bfc1-08002be10318}
     inf:                               Class Options  = Configurable
     inf:                               {Configure Driver: TAP-Windows Adapter V9}
     inf:                                    Section Name = tap0901.ndi
     inf:                                    {Add Service: tap0901}
     inf:                                         Start Type    = 3
     inf:                                         Service Type  = 1
     inf:                                         Error Control = 1
     inf:                                         Image Path    = \SystemRoot\System32\drivers\tap0901.sys
     inf:                                         Display Name  = TAP-Windows Adapter V9
     inf:                                         Group         = NDIS
     inf:                                         Updated service 'tap0901'.
     inf:                                    {Add Service: exit(0x00000000)}
     inf:                                    Hardware Id  = tap0901
     inf:                                    {Configure Driver Configuration: tap0901.ndi}
     inf:                                         Service Name  = tap0901
     inf:                                         Config Flags  = 0x00000000
     inf:                                    {Configure Driver Configuration: exit(0x00000000)}
     inf:                               {Configure Driver: exit(0x00000000)}
     flq:                               Copying 'C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_98fc017a6cec15eb\tap0901.sys' to 'C:\Windows\System32\drivers\tap0901.sys'.
     cpy:                               Existing file 'C:\Windows\System32\drivers\tap0901.sys' remains unchanged.
     sto:                          {Configure Driver Package: exit(0x00000000)}
     dvi:                          Install Device: Configuring device (oem87.inf:tap0901,tap0901.ndi). 20:51:36.107
     dvi:                          Install Device: Configuring device completed. 20:51:36.123
     dvi:                          Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                          Install Device: Starting device 'ROOT\NET\0000'. 20:51:36.123
     dvi:                          Install Device: Starting device completed. 20:51:36.123
!    dvi:                          Device pending start: Device has problem: 0x38 (CM_PROB_NEED_CLASS_CONFIG), problem status: 0x00000000.
     dvi:                     {Configure Device - exit(0x00000000)} 20:51:36.123
     dvi:                     Device Status: 0x01802401, Problem: 0x38
     dvi:                {Install Device - exit(0x00000000)} 20:51:36.154
     dvi:           {Core Device Install - exit(0x00000000)} 20:51:36.154
     dvi:           Waiting for device post-install to complete. 20:51:36.154
     dvi:           Device post-install completed. 20:51:36.397
!    dvi:           Device post-install problem: 0x34 (0xC0000428)
     ump:      {Plug and Play Service: Device Install exit(00000000)}
     ndv: {Update Device Driver - exit(00000000)}
     ndv: {Install Related Drivers} 20:51:36.428
     ndv: {Install Related Drivers: exit(0x00000000)} 20:51:36.448
<<<  Section end 2018/04/26 20:51:36.464
<<<  [Exit status: SUCCESS]

Windows TAP driver 9.21.2 unfortunately does not work. Same problem. I have to switch off secure boot for it to work.

Tom7320

samuli wrote Please test this installer and let me know if it works on the affected systems.

No, sorry, does not work. Here ist the log:

[Boot Session: 2018/04/26 21:15:21.485]

>>>  [Device Install (UpdateDriverForPlugAndPlayDevices) - tap0901]
>>>  Section start 2018/04/26 21:17:52.090
      cmd: "C:\Program Files\TAP-Windows\bin\tapinstall.exe" install "C:\Program Files\TAP-Windows\driver\OemVista.inf" tap0901
     ndv: INF path: C:\Program Files\TAP-Windows\driver\OemVista.inf
     ndv: Install flags: 0x00000001
     ndv: {Update Device Driver - ROOT\NET\0000}
     ndv:      Search options: 0x00000080
     ndv:      Searching single INF 'C:\Program Files\TAP-Windows\driver\OemVista.inf'
     dvi:      {Build Driver List} 21:17:52.121
     dvi:           Searching for hardware ID(s):
     dvi:                tap0901
     dvi:           Created Driver Node:
     dvi:                HardwareID   - tap0901
     dvi:                InfName      - c:\program files\tap-windows\driver\oemvista.inf
     dvi:                DevDesc      - TAP-Windows Adapter V9
     dvi:                Section      - tap0901.ndi
     dvi:                Rank         - 0x00ff0000
     dvi:                Signer Score - Authenticode
     dvi:                DrvDate      - 04/15/2018
     dvi:                Version      - 9.0.0.22
     dvi:      {Build Driver List - exit(0x00000000)} 21:17:52.184
     dvi:      {DIF_SELECTBESTCOMPATDRV} 21:17:52.199
     dvi:           Default installer: Enter 21:17:52.199
     dvi:                {Select Best Driver}
     dvi:                     Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:                     Selected Driver:
     dvi:                          Description - TAP-Windows Adapter V9
     dvi:                          InfFile     - c:\program files\tap-windows\driver\oemvista.inf
     dvi:                          Section     - tap0901.ndi
     dvi:                {Select Best Driver - exit(0x00000000)}
     dvi:           Default installer: Exit
     dvi:      {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 21:17:52.246
     ndv:      Force Installing Driver:
     ndv:           Inf Name       - oemvista.inf
     ndv:           Driver Date    - 04/15/2018
     ndv:           Driver Version - 9.0.0.22
     ndv:      Driver package 'C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_98fc017a6cec15eb\oemvista.inf' is already imported.
     sto:      {Setup Import Driver Package: c:\program files\tap-windows\driver\oemvista.inf} 21:17:52.262
     sto:           Driver package already imported as 'oem87.inf'.
     sto:      {Setup Import Driver Package - exit (0x00000000)} 21:17:52.293
     dvi:      Searching for hardware ID(s):
     dvi:           tap0901
     dvi:      Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:      {Plug and Play Service: Device Install for ROOT\NET\0000}
     dvi:           Driver INF Path: C:\Windows\INF\oem87.inf
     dvi:           Driver Node Name: oemvista.inf:3beb73aff103cc24:tap0901.ndi:9.0.0.22:tap0901,
     dvi:           Driver Store Path: C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_98fc017a6cec15eb\oemvista.inf
     dvi:           Searching for hardware ID(s):
     dvi:                tap0901
     dvi:           Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:           {Core Device Install} 21:17:52.387
     dvi:                {Install Device - ROOT\NET\0000} 21:17:52.387
     dvi:                     Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                     Parent device: HTREE\ROOT\0
     dvi:                     {Configure Device - ROOT\NET\0000} 21:17:52.387
     dvi:                          Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                          Parent device: HTREE\ROOT\0
     sto:                          {Configure Driver Package: C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_98fc017a6cec15eb\oemvista.inf}
     sto:                               Source Filter  = tap0901
     inf:                               Class GUID     = {4d36e972-e325-11ce-bfc1-08002be10318}
     inf:                               Class Options  = Configurable
     inf:                               {Configure Driver: TAP-Windows Adapter V9}
     inf:                                    Section Name = tap0901.ndi
     inf:                                    {Add Service: tap0901}
     inf:                                         Start Type    = 3
     inf:                                         Service Type  = 1
     inf:                                         Error Control = 1
     inf:                                         Image Path    = \SystemRoot\System32\drivers\tap0901.sys
     inf:                                         Display Name  = TAP-Windows Adapter V9
     inf:                                         Group         = NDIS
     inf:                                         Updated service 'tap0901'.
     inf:                                    {Add Service: exit(0x00000000)}
     inf:                                    Hardware Id  = tap0901
     inf:                                    {Configure Driver Configuration: tap0901.ndi}
     inf:                                         Service Name  = tap0901
     inf:                                         Config Flags  = 0x00000000
     inf:                                    {Configure Driver Configuration: exit(0x00000000)}
     inf:                               {Configure Driver: exit(0x00000000)}
     flq:                               Copying 'C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_98fc017a6cec15eb\tap0901.sys' to 'C:\Windows\System32\drivers\tap0901.sys'.
     cpy:                               Existing file 'C:\Windows\System32\drivers\tap0901.sys' remains unchanged.
     sto:                          {Configure Driver Package: exit(0x00000000)}
     dvi:                          Install Device: Configuring device (oem87.inf:tap0901,tap0901.ndi). 21:17:52.418
     dvi:                          Install Device: Configuring device completed. 21:17:52.418
     dvi:                          Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                          Install Device: Starting device 'ROOT\NET\0000'. 21:17:52.418
     dvi:                          Install Device: Starting device completed. 21:17:52.418
!    dvi:                          Device pending start: Device has problem: 0x38 (CM_PROB_NEED_CLASS_CONFIG), problem status: 0x00000000.
     dvi:                     {Configure Device - exit(0x00000000)} 21:17:52.418
     dvi:                     Device Status: 0x01802401, Problem: 0x38
     dvi:                {Install Device - exit(0x00000000)} 21:17:52.434
     dvi:           {Core Device Install - exit(0x00000000)} 21:17:52.449
     dvi:           Waiting for device post-install to complete. 21:17:52.449
     dvi:           Device post-install completed. 21:17:52.606
!    dvi:           Device post-install problem: 0x34 (0xC0000428)
     ump:      {Plug and Play Service: Device Install exit(00000000)}
     ndv: {Update Device Driver - exit(00000000)}
     ndv: {Install Related Drivers} 21:17:52.621
     ndv: {Install Related Drivers: exit(0x00000000)} 21:17:52.637
<<<  Section end 2018/04/26 21:17:52.653
<<<  [Exit status: SUCCESS]

mhab12

If it gives any clues, the publisher in the 'Programs & Features' control panel item shows up incorrectly. Perhaps this flows through the driver publisher too giving rise to the signature error? It shows up at ${PRODUCT_PUBLISHER}, not OpenVPN, Inc. as you would expect.

[deleted]

The PRODUCT_PUBLISHER thing is a separate problem. I've create new Windows installers which bundle the old tap-windows6 version. This is an interim solution while figuring out how to make MS sign the driver.

Tom7320

Strange! 9.21.2 also does not work on my system! Same problem! As soon as I switch off secure boot it works flawlessly!

Tom7320

...and it probably is a pious wish that Microsoft is so generous to add a tun/tap driver to their kernel sources, isn't it?

funmaker

This worked for me:

open cmd prompt via Start Menu, 'Windows System', right click on CMD (DOS prompt), More, then select Run as Administrator
on a command line type:

bcdedit.exe /set nointegritychecks on

This turns off integrity checking of unsigned driver - allows unsigned drivers to be installed
- run / install your software, openVPN TAP software

Test and then run the following to turn integrity checking back on

bcdedit.exe /set nointegritychecks off

This is a permanent fix, not temporary for this session.

kfnoho

I hopefully tried the last suggested solution. Sigh. It failed again. Here are the contents of the Installation Window:

We are running on a 64-bit system.
Output folder: C:\Program Files\TAP-Windows\bin
Extract: tapinstall.exe... 100%
Output folder: C:\Program Files\TAP-Windows\driver
Extract: OemVista.inf... 100%
Extract: tap0901.cat... 100%
Extract: tap0901.sys... 100%
Delete file: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TAP-Windows\Utilities\Add a new TAP virtual ethernet adapter.lnk
Delete file: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TAP-Windows\Utilities\Delete ALL TAP virtual ethernet adapters.lnk
Remove folder: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TAP-Windows\Utilities\
Remove folder: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TAP-Windows\
Create folder: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TAP-Windows\Utilities
Create shortcut: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TAP-Windows\Utilities\Add a new TAP virtual ethernet adapter.lnk
Create shortcut: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TAP-Windows\Utilities\Delete ALL TAP virtual ethernet adapters.lnk
Output folder: C:\Program Files\TAP-Windows
Extract: license.txt... 100%
Extract: icon.ico... 100%
tapinstall.exe hwids returned: 0
TAP update (tap0901) (May require confirmation)
Updating drivers for tap0901 from C:\Program Files\TAP-Windows\driver\OemVista.inf.
UpdateDriverForPlugAndPlayDevices failed, GetLastError=1460
tapinstall.exe failed.
tapinstall.exe returned: 2
tapinstall.exe cumulative status: 2
Created uninstaller: C:\Program Files\TAP-Windows\Uninstall.exe
Completed

ghost887

I'm experiencing the same issue. Windows 10 1803 and installing tap-windows6 9.21.2. This started 3 days ago. Have tried all the options spoken above, and also, tried uninstalling TAP driver, and removing it from the registry. Still no change.

ENG900PM

ghost887 wrote I'm experiencing the same issue. Windows 10 1803 and installing tap-windows6 9.21.2. This started 3 days ago. Have tried all the options spoken above, and also, tried uninstalling TAP driver, and removing it from the registry. Still no change.

ghost887 did you fix the problem? It started for me about a week ago.

None of the fixes in this thread, or others I tried from other forums, worked for me.

ENG900PM

Hey ghost887,

I just solved the problem I was having. Although re-reading this post you may be having a different problem.

Anyway on my OpenVPN client machine I ran this command "As Administrator":

C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TAP-Windows\Utilities\Add a new TAP virtual ethernet adapter.lnk

I was trying to run it on my OpenVPN server machine. However it already had a properly functioning TAP virtual ethernet adapter.

Maybe this helps.

brenakvpn

This is happening for me too. Disabling SecureBoot isn't really an option for me.

I've tried removing all top drivers from the INF store:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc730875(v=ws.11)

I've uninstalled and re-installed multiple times under different scenarios.

I've tried it with SecureBoot disabled.
I've tried it with SecureBoot disabled and driver integrity check turned off.
I've ran it as administrator.
I've tried to manually install.

Nothing works. It always locks up, and times out about 4 minutes later.

I only have windows defender for AV. Its a new laptop with a fresh install of windows 10 version 1803 Build 17134.345

setupapi.dev.log:

>>>  [Device Install (UpdateDriverForPlugAndPlayDevices) - tap0901]
>>>  Section start 2018/11/06 13:40:22.746
      cmd: "C:\Program Files\TAP-Windows\bin\tapinstall.exe" install "C:\Program Files\TAP-Windows\driver\OemVista.inf" tap0901
     ndv: INF path: C:\Program Files\TAP-Windows\driver\OemVista.inf
     ndv: Install flags: 0x00000001
     ndv: {Update Device Driver - ROOT\NET\0001}
     ndv:      Search options: 0x00000080
     ndv:      Searching single INF 'C:\Program Files\TAP-Windows\driver\OemVista.inf'
     dvi:      {Build Driver List} 13:40:22.760
     dvi:           Searching for hardware ID(s):
     dvi:                tap0901
     dvi:           Created Driver Node:
     dvi:                HardwareID   - tap0901
     dvi:                InfName      - c:\program files\tap-windows\driver\oemvista.inf
     dvi:                DevDesc      - TAP-Windows Adapter V9
     dvi:                Section      - tap0901.ndi
     dvi:                Rank         - 0x00ff0000
     dvi:                Signer Score - Authenticode
     dvi:                DrvDate      - 04/21/2016
     dvi:                Version      - 9.0.0.21
     dvi:      {Build Driver List - exit(0x00000000)} 13:40:22.776
     dvi:      {DIF_SELECTBESTCOMPATDRV} 13:40:22.777
     dvi:           Default installer: Enter 13:40:22.778
     dvi:                {Select Best Driver}
     dvi:                     Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:                     Selected Driver:
     dvi:                          Description - TAP-Windows Adapter V9
     dvi:                          InfFile     - c:\program files\tap-windows\driver\oemvista.inf
     dvi:                          Section     - tap0901.ndi
     dvi:                {Select Best Driver - exit(0x00000000)}
     dvi:           Default installer: Exit
     dvi:      {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 13:40:22.785
     ndv:      Force Installing Driver:
     ndv:           Inf Name       - oemvista.inf
     ndv:           Driver Date    - 04/21/2016
     ndv:           Driver Version - 9.0.0.21
     ndv:      Driver package 'C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_a572b7f20c402d28\oemvista.inf' is already imported.
     sto:      {Setup Import Driver Package: c:\program files\tap-windows\driver\oemvista.inf} 13:40:22.790
     sto:           Driver package already imported as 'oem70.inf'.
     sto:      {Setup Import Driver Package - exit (0x00000000)} 13:40:22.796
     dvi:      Searching for hardware ID(s):
     dvi:           tap0901
     dvi:      Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:      {Plug and Play Service: Device Install for ROOT\NET\0001}
     dvi:           Driver INF Path: C:\Windows\INF\oem70.inf
     dvi:           Driver Node Name: oemvista.inf:3beb73aff103cc24:tap0901.ndi:9.0.0.21:tap0901,
     dvi:           Driver Store Path: C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_a572b7f20c402d28\oemvista.inf
     dvi:           Searching for hardware ID(s):
     dvi:                tap0901
     dvi:           Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
     dvi:           {Core Device Install} 13:40:22.857
     dvi:                {Install Device - ROOT\NET\0001} 13:40:22.859
     dvi:                     Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                     Parent device: HTREE\ROOT\0
     dvi:                     {Configure Device - ROOT\NET\0001} 13:40:22.863
     dvi:                          Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                          Parent device: HTREE\ROOT\0
     sto:                          {Configure Driver Package: C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_a572b7f20c402d28\oemvista.inf}
     sto:                               Source Filter  = tap0901
     inf:                               Class GUID     = {4d36e972-e325-11ce-bfc1-08002be10318}
     inf:                               Class Options  = Configurable
     inf:                               {Configure Driver: TAP-Windows Adapter V9}
     inf:                                    Section Name = tap0901.ndi
     inf:                                    {Add Service: tap0901}
     inf:                                         Start Type    = 3
     inf:                                         Service Type  = 1
     inf:                                         Error Control = 1
     inf:                                         Image Path    = \SystemRoot\System32\drivers\tap0901.sys
     inf:                                         Display Name  = TAP-Windows Adapter V9
     inf:                                         Group         = NDIS
     inf:                                         Updated service 'tap0901'.
     inf:                                    {Add Service: exit(0x00000000)}
     inf:                                    Hardware Id  = tap0901
     inf:                                    {Configure Driver Configuration: tap0901.ndi}
     inf:                                         Service Name  = tap0901
     inf:                                         Config Flags  = 0x00000000
     inf:                                    {Configure Driver Configuration: exit(0x00000000)}
     inf:                               {Configure Driver: exit(0x00000000)}
     flq:                               Copying 'C:\Windows\System32\DriverStore\FileRepository\oemvista.inf_amd64_a572b7f20c402d28\tap0901.sys' to 'C:\Windows\System32\drivers\tap0901.sys'.
     cpy:                               Existing file 'C:\Windows\System32\drivers\tap0901.sys' remains unchanged.
     sto:                          {Configure Driver Package: exit(0x00000000)}
     dvi:                          Install Device: Configuring device (oem70.inf:tap0901,tap0901.ndi). 13:40:22.897
     dvi:                          Install Device: Configuring device completed. 13:40:22.900
     dvi:                          Device Status: 0x01802001, Problem: 0x0 (0x00000000)
     dvi:                          Install Device: Starting device 'ROOT\NET\0001'. 13:40:22.902
     dvi:                          Install Device: Starting device completed. 13:40:22.906
!    dvi:                          Device pending start: Device has problem: 0x38 (CM_PROB_NEED_CLASS_CONFIG), problem status: 0x00000000.
     dvi:                     {Configure Device - exit(0x00000000)} 13:40:22.909
     dvi:                     Device Status: 0x01802401, Problem: 0x38
     dvi:                {Install Device - exit(0x00000000)} 13:40:22.922
     dvi:           {Core Device Install - exit(0x00000000)} 13:40:22.923
     dvi:           Waiting for device post-install to complete. 13:40:22.925
!!!  dvi:           Timed out waiting for device post-install to complete. 13:44:07.928
     ump:      {Plug and Play Service: Device Install exit(000005b4)}
!!!  ndv:      Device install failed for device.
!!!  ndv:      Error 1460: This operation returned because the timeout period expired.
     ndv:      Installing NULL driver.
     dvi:      {Plug and Play Service: Device Install for ROOT\NET\0001}
!    dvi:           Installing NULL driver!
     dvi:           {DIF_ALLOW_INSTALL} 13:44:08.056
     dvi:                Default installer: Enter 13:44:08.057
     dvi:                Default installer: Exit
     dvi:           {DIF_ALLOW_INSTALL - exit(0xe000020e)} 13:44:08.059
     dvi:           {DIF_REGISTER_COINSTALLERS} 13:44:08.059
     dvi:                Default installer: Enter 13:44:08.060
     dvi:                Default installer: Exit
     dvi:           {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 13:44:08.062
     dvi:           {DIF_INSTALLDEVICE} 13:44:08.062
     dvi:                Default installer: Enter 13:44:08.063
!    dvi:                     Installing NULL driver!
     dvi:                     Install Null Driver: Removing device sub-tree. 13:44:08.066
     dvi:                     Install Null Driver: Removing device sub-tree completed. 13:44:08.068
     dvi:                     Install Null Driver: Restarting device. 13:44:08.073
     dvi:                     Install Null Driver: Restarting device completed. 13:44:08.076
     dvi:                     Install Device: Configuring device class. 13:44:08.077
     dvi:                     Install Device: Configuring device class completed. 13:44:08.077
     dvi:                     Device Status: 0x01802401, Problem: 0x1c (0x00000000)
     dvi:                     Install Device: Starting device 'ROOT\NET\0001'. 13:44:08.080
     dvi:                     Install Device: Starting device completed. 13:44:08.082
     dvi:                Default installer: Exit
     dvi:           {DIF_INSTALLDEVICE - exit(0x00000000)} 13:44:08.084
     ump:      {Plug and Play Service: Device Install exit(00000000)}
     ndv: {Update Device Driver - exit(000005b4)}
!!!  ndv: Failed to install device instance 'ROOT\NET\0001'. Error = 0x000005b4
<<<  Section end 2018/11/06 13:44:08.090
<<<  [Exit status: FAILURE(0x000005b4)]

remona

If the TAP installer failed then you just need to check how to fix Icqcore.dll and after fix it you can install the file and again windows 10 will work.