Hello people of Open Vpn community,
We have an OpenVpn installed on a Windows server. There is a network that assigns Ip addresses via DHCP, with Ip blocks 10.100.
We can access the devices on the field that has the Ip block 10.100 , via 10.25.105.187 which is endpoint for OpenVpn.
However, we cannot access from the Ip block 10.25.101 to devices has the Ip block 10.100. Please see the image below the post.
How do we need to configure OpenVpn to access the devices with 10.100 IP blocks, from the servers with 10.25 IP blocks via the DHCP server on 10.25.101.187?
Conf. file
#OpenVPN Server Configuration
mode server
tls-server
;local 10.25.101.187
port 1194
proto udp
fragment 1500
dev tap
dev-node tap-bridge2
;dev tun
tun-mtu 1500
ca ca.crt
cert Server01.crt
key Server01.key
dh dh1024.pem
;ifconfig-pool-persist ipp.txt
server-bridge 10.100.0.1 255.255.0.0 10.100.0.2 10.100.1.254
cipher AES-256-CBC
comp-lzo
keepalive 20 180
user root
group root
persist-key
persist-tun
status openvpn-status.log
status-version 3
script-security 3
verb 4
duplicate-cn
Struct schema
