jabarel Hello, I just whant to explain a little bit in my home i have to routers (fiber router 192.168.1.1 where i have the pppoe connection) and a random router(192.168.0.1). In the router 192.168.0.1 the ethernet cable from fiber router enter on the wan and i have internet access. I succesfull installed on the random router (192.168.0.1) the openvpn server everything its just fine, but i have low speed on the vpn clients(its limited by the router hardware) I just installed the openvpn server on my pc (win 10), i generate all the certificates, i can connect via my android to the server, but i don`t have internet access.I can ping only 10.8.0.1 (which is the vpn server). What i need to do to have internet access on the client,(Windows firewall its off, router firewall its off) server config: port 443 proto tcp dev tun ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1 bypass-dhcp" keepalive 10 120 cipher AES-128-CBC persist-key persist-tun verb 4 push "route 192.168.0.0 255.255.255.252" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" client config: client dev tun proto tcp remote my-dns 443 nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key remote-cert-tls server verb 4 auth-nocache Seems i get this erros from what i see with red on the server logs Could not determine IPv4/IPv6 protocol. Using AF_INET6 client1/213.233.84.168 MULTI: bad source address from client [10.188.25.47], packet dropped Thanks
jabarel TinCanTech wrote Please see https://forums.openvpn.net/viewtopic.php?f=7&t=7806 i just did all settings, same, clients have no internet access..
