I have just installed openVPN on my raspberry and I am able to connect to PIA with no issues, and now I am just checking it is working as designed, but I am getting a bit confused and concern that it might be leaking DNS and IP packets, and I would very much appreciate someone going over and checking my results. and advising me on any issues.
I have disable my IP6
I have ran the following command
Code: Select all
curl ipinfo.io/json
and got this results
- {
"ip": "1***.***.***.**1.", NOT MY Public IP Address
"hostname": "No Hostname",
"city": "London",
"region": "England",
"country": "GB",
"loc": "51.5092,-0.0955",
"org": "AS20473 Choopa, LLC",
"postal": "EC4N"
then I ran this
Code: Select all
sudo service openvpn status
● openvpn.service - OpenVPN service
Loaded: loaded (/lib/systemd/system/openvpn.service; enabled)
Active: active (exited) since Thu 2017-01-26 17:25:52 UTC; 16min ago
Process: 396 ExecStart=/bin/true (code=exited, status=0/SUCCESS)
Main PID: 396 (code=exited, status=0/SUCCESS)
CGroup: /system.slice/openvpn.service
Jan 26 17:25:52 raspberrypi systemd[1]: Started OpenVPN service.
and the document I got the code from says that the word exited is not good and that I showed be looking for Running.
if this is the case then how can I resolve it ?
Code: Select all
route -n
- Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.1.10.5 128.0.0.0 UG 0 0 0 tun0
0.0.0.0 192.168.0.1 0.0.0.0 UG 302 0 0 wlan0
10.1.10.1 10.1.10.5 255.255.255.255 UGH 0 0 0 tun0
10.1.10.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
104.238.169.50 192.168.0.1 255.255.255.255 UGH 0 0 0 wlan0
128.0.0.0 10.1.10.5 128.0.0.0 UG 0 0 0 tun0
192.168.0.0 0.0.0.0 255.255.255.0 U 302 0 0 wlan0
does this look OK and am I protected
my setup is:
hardware: Raspberry PI
OS: Raspberry Jessia
VVPN OpenVPN ( Latest )
