like subject I would pass from mac to windows 10, I use self config files (mac and windows), I get the file from tunnelblick and I move them into config of openvpn gui. I rename the file from .conf to .ovpn.
when I lunch the openvpn gui (like administrator and not) the server reply me "ok", the vpn's connected, the log server is ok, the log client is ok except:
Thu Jan 05 14:48:17 2017 C:\WINDOWS\system32\route.exe ADD 192.168.1.253 MASK 255.255.255.0 10.8.0.5
Thu Jan 05 14:48:17 2017 Warning: address 192.168.1.253 is not a network address in relation to netmask 255.255.255.0
Thu Jan 05 14:48:17 2017 ROUTE: route addition failed using CreateIpForwardEntry: Parametro non corretto. [status=87 if_index=22]
Thu Jan 05 14:48:17 2017 Route addition via IPAPI failed [adaptive]
Thu Jan 05 14:48:17 2017 Route addition fallback to route.exe
after it continue and it write:
Thu Jan 05 14:48:17 2017 C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5
Thu Jan 05 14:48:17 2017 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=35 and dwForwardType=4
Thu Jan 05 14:48:17 2017 Route addition via IPAPI succeeded [adaptive]
Thu Jan 05 14:48:17 2017 Initialization Sequence Completed
Thu Jan 05 14:48:17 2017 MANAGEMENT: >STATE:1483624097,CONNECTED,SUCCESS,10.8.0.6,77.43.30.72,1194,,
finish file log.
while in tunnelblick write:
2017-01-05 15:11:33 MANAGEMENT: >STATE:1483625493,ADD_ROUTES,,,
2017-01-05 15:11:33 /sbin/route add -net 192.168.1.253 10.8.0.5 255.255.255.0
add net 192.168.1.253: gateway 10.8.0.5
2017-01-05 15:11:33 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0
add net 10.8.0.0: gateway 10.8.0.5
2017-01-05 15:11:33 Initialization Sequence Completed
the vpn is connected but when I try to connect to a remote server with lan ip (192.168.1.15) it isn't attainable, why?
thanks
