I'm a totally newbie about openvpn.
I've installed openvpn server on a synology nas.
A friend of mine helped me to install openvpn on an android phone. It works like a charm, even if now I don't remember exacly what I've made.
Yesterday I have tried to install it on my win8 pc. I've passed the openvpn.ovpn file to the openvpn gui, running as administrator, but I falled into the "WARNING: No server certificate verification method has been enabled. See
http://openvpn.net/howto.html#mitm for more info."
Can someone tell me what I have to do now? I've tried to read the documentation but I haven't understood it. 🙁
My openvpn.ovpn config file is the following. THank you for your help.
dev tun
tls-client
remote x.x.x.x 1194
route-method exe
route-delay 2
# The "float" tells OpenVPN to accept authenticated packets from any address,
# not only the address which was specified in the --remote option.
# This is useful when you are connecting to a peer which holds a dynamic address
# such as a dial-in user or DHCP client.
# (Please refer to the manual of OpenVPN for more information.)
#float
# If redirect-gateway is enabled, the client will redirect it's
# default network gateway through the VPN.
# It means the VPN connection will firstly connect to the VPN Server
# and then to the internet.
# (Please refer to the manual of OpenVPN for more information.)
#redirect-gateway def1
# dhcp-option DNS: To set primary domain name server address.
# Repeat this option to set secondary DNS server addresses.
#dhcp-option DNS DNS_IP_ADDRESS
pull
# If you want to connect by Server's IPv6 address, you should use
# "proto udp6" in UDP mode or "proto tcp6-client" in TCP mode
proto udp
script-security 2
;ca ca.crt
comp-lzo
reneg-sec 0
auth-user-pass
<ca>
-----BEGIN CERTIFICATE-----
omissis
-----END CERTIFICATE-----
</ca>
