Im trying to set up openVPN on an LRT214 router. The client config is as follows: [oconf=Client config]dev tun proto tcp remote 212.186.186.76 1194 cipher AES-128-CBC auth SHA1 resolv-retry infinite nobind persist-key persist-tun client auth-user-pass verb 3 .. [/oconf] The Server config: [img]http://i.imgur.com/xsB95mH.png[/img] The OpenVPN client is stuck at "Obtaining configuration" Any ideas what could go wrong here? Firewalls etc on Windows pc disabled. Rules on the router are configured to allow 1194. Thanks! Max

See where it says: [code](Virtual IPv4 Network Address: Default 172.31.0.0)[/code] Don't change what you don't understand ..

LRT214 configuration

MaxH

Im trying to set up openVPN on an LRT214 router.

The client config is as follows: dev tun
proto tcp
remote 212.186.186.76 1194
cipher AES-128-CBC
auth SHA1
resolv-retry infinite
nobind
persist-key
persist-tun
client
auth-user-pass
verb 3

<ca>
..
</ca> The Server config:

The OpenVPN client is stuck at "Obtaining configuration"
Any ideas what could go wrong here? Firewalls etc on Windows pc disabled. Rules on the router are configured to allow 1194.

Thanks!
Max

TinCanTech

See where it says:

(Virtual IPv4 Network Address: Default 172.31.0.0)

Don't change what you don't understand ..