Hello All,
I would like to ask for some help as we are currently facing an issue with a server hosting an Openvpn-as 2.0.17.
The context is :
- - 1 openvpn-as server in local-subnet
- - eth0 : private interface in local-subnet
- eth1 : public interface
- 1 vpn-ipsec server in same local subnet
- 1 site to site connection openvpn configured between remote-subnet-#1 and local-subnet, with a defined user with following config :
- - Static IP
- NAT Access control addressing method
- Allow access from all server-side private subnets
- Allow access from all other VPN clients
- Act as a gateway for remote-subnet-#1
- General VPN settings
- - Routing is enabled using NAT
- In : Specify the private subnets to which all clients should be given access, remote-subnet-#2 is defined
- 1 site to site ipsec connection configured between remote-subnet-#2 and local-subnet
- 1 routing rule on openvpn server to route packet with dest remote-subnet-#2 to vpn-ipsec server via interface eth0
The issue is that this set up works fine as far as we do not reboot the server …
- - After the reboot
- - route to remote-subnet-#2 is still present
- packets cannot go out of openvpn server
Do you have any ideas on what could be the issue ? should we check for any issue besides iptables or routing ?
thanks !