joma Hi, I have a Pfsense running a OpenVPN server with several clients. My problem is I can't subsitute a Pfsense OpenVPN client by a OpenWRT Client, because with the Pfsense client I can connect with other clients but with the OpenWRT, I can't . Pfsense Client Config: dev ovpnc1 verb 1 dev-type tun tun-ipv6 dev-node /dev/tun1 writepid /var/run/openvpn_client1.pid #user nobody #group nobody script-security 3 daemon keepalive 10 60 ping-timer-rem persist-tun persist-key proto udp cipher AES-256-CBC auth SHA1 up /usr/local/sbin/ovpn-linkup down /usr/local/sbin/ovpn-linkdown local 192.168.1.14 lport remoteport management /var/etc/openvpn/client1.sock unix remote remotehost remoteport ifconfig 172.16.0.2 172.16.0.1 route 192.168.0.0 255.255.255.0 secret /var/etc/openvpn/client1.secret comp-lzo yes resolv-retry infinite route 192.168.25.0 255.255.255.0 route 192.168.0.0 255.255.255.0 route 192.168.30.0 255.255.255.0 route 192.168.20.0 255.255.255.0 OpenWRT 15.5 (Gli.NET Router) config: persist-key persist-tun ping-timer-rem up-restart auth SHA1 cipher AES-256-CBC comp-lzo yes dev tun ifconfig 172.16.0.2 172.16.0.1 keepalive 10 60 lport remoteport proto udp remote remotehost remoteport resolv-retry infinite route 192.168.0.0 255.255.255.0 script-security 2 secret /etc/openvpn/secret.txt verb 3 down /etc/openvpn/down.sh up /etc/openvpn/up.sh up.sh #!/bin/ash /sbin/route add -net 192.168.1.0 netmask 255.255.255.0 gw 172.16.0.1 /sbin/route add -net 192.168.2.0 netmask 255.255.255.0 gw 172.16.0.1 /sbin/route add -net 192.168.3.0 netmask 255.255.255.0 gw 172.16.0.1 /sbin/route add -net 192.168.4.0 netmask 255.255.255.0 gw 172.16.0.1 exit 0 *************************************************************************************** Any help or solution for this problem? Thanks in Advance. Jorge Mota
Traffic joma wroteAny help or solution for this problem? Exactly what is the problem .. post the log file please.
joma Hi, I have Pfsense server in my office with 4 different OpenVPN tunnels configured. In one of them (office<->home) I want to change my present home pfsense router (and client of one of server tunnels) by a Gli.Net GL-MT300N OpenWRT based router. With the pfsense router I can reach all other networks connected via OpenVPN tunnels from client and server, but when I change the pfsense to GL-MT300N I only can reach my office networks from my Home network and I don't know why, because I think that I use the same config. What log you want? Server or client? Thanks in Advance. Jorge Mota
