Hi,
I set up a OpenVpn-service on a Synology DiskStation. Redirecting by no-ip works like a charm. Connecting by the Android-app ""OpenVPN for Android" (by Arne Schwabe) works, but when I connect using the windows-client it seems to be connected. But I can't access any devices in the VPN network.
dev tun
tls-client
remote _MY-NO-IP_ 1194
# The "float" tells OpenVPN to accept authenticated packets from any address,
# not only the address which was specified in the --remote option.
# This is useful when you are connecting to a peer which holds a dynamic address
# such as a dial-in user or DHCP client.
# (Please refer to the manual of OpenVPN for more information.)
#float
# If redirect-gateway is enabled, the client will redirect it's
# default network gateway through the VPN.
# It means the VPN connection will firstly connect to the VPN Server
# and then to the internet.
# (Please refer to the manual of OpenVPN for more information.)
#redirect-gateway
# dhcp-option DNS: To set primary domain name server address.
# Repeat this option to set secondary DNS server addresses.
#dhcp-option DNS _MY-DNS-ENRY_
pull
# If you want to connect by Server's IPv6 address, you should use
# "proto udp6" in UDP mode or "proto tcp6-client" in TCP mode
proto udp
script-security 2
ca ca.crt
comp-lzo
reneg-sec 0
auth-user-pass
I already tried to activate the following settings:
#float
#redirect-gateway
#dhcp-option DNS _dny-address_
Connection to the VPN server works, but I still can't open any WebGUI of the desired devices, nor can't I ping any device.
What's wrong?
As it's working on Android, I guess I have to setup something on my Windows 10 machine.
Or shall I try to connect using linux?
Thanks!
