Config OpeVPN on Windows server 2012

Carlos_Santos

hi, im new here, so i dont know if this problem has a solution or not but im despered 🙁
So im trying to config a OpenVPN on a Server machine, that runs windows server 2012, and have a NIC team with 2 cards.
I need to create a bridge between the Tap-Windows Adapter v9 and a card, beacuse i'm using "dev tap" and I can not create a bridge between the team and the adapter. My question is whether it is possible to create a bridge to work in " dev tap" without deleting the team.
Creating a bridge with the team and the adapter, gives error.

(sory bad English)

help :!: :!: :!:

Traffic

Please post result of ipconfig /all from your server.

Carlos_Santos

Windows IP Configuration

Host Name . . . . . . . . . . . . : Terminais
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TAP-Windows Adapter V9
Physical Address. . . . . . . . . : 00-FF-25-31-48-FC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Solunext Terminal:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Network Adapter Multiplexor Dri
ver
Physical Address. . . . . . . . . : A0-48-1C-D6-8B-49
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f0f5:169e:55dc:2fbe%18(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.14(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{80815E1D-32CF-4571-BF34-36568F9D3374}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Placa Microsoft ISATAP
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Ligação de Área Local* 12:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Carlos_Santos

Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. Todos os direitos reservados.

C:\Windows\System32>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Terminais
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TAP-Windows Adapter V9
Physical Address. . . . . . . . . : 00-FF-25-31-48-FC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Solunext Terminal:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Network Adapter Multiplexor Dri
ver
Physical Address. . . . . . . . . : A0-48-1C-D6-8B-49
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f0f5:169e:55dc:2fbe%18(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.14(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{80815E1D-32CF-4571-BF34-36568F9D3374}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Placa Microsoft ISATAP
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Ligação de Área Local* 12:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Windows\System32>

Carlos_Santos

Traffic

Carlos_Santos wroteserver 2012, and have a NIC team with 2 cards.
I need to create a bridge between the Tap-Windows Adapter v9 and a card

Looks like you will have to disable this:

Carlos_Santos wroteEthernet adapter Solunext Terminal:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Network Adapter Multiplexor Driver