daniel.lewis2
Hello all! I'm having a problem trying to establish a successful connection to the Access Server which resides on the inside network. ISP is using DHCP for my public IP, long term I'll have to address this problem but right now I'm simply trying to get the VPN to at least test successfully.
I believe the problem is somewhere in the Firewall configuration in relation to either an access rule or perhaps the NAT configurations needed to do the port forwarding for requests coming to the public IP.
Setup is ISP modem with public IP which connects to the PIX outside interface with an IP of 10.x.x.1. The PIX Inside interface connects to a Cisco Router with an IP of 10.x.x.2 which then connects to a Cisco Switch where the OpenVPN Access Server resides with an IP of 172.x.x.61. What I need to know is what specifically need to be configured in order to make this configuration work? I'm tracking I'll have to forward the TCP/UDP ports when the request come in on the public IP. Just need better details on what all needs to be done in order to be successful.
Appreciate any assistance.
Traffic
What version of OpenVPN are you use ?
daniel.lewis2
I'm using the latest virtual appliance posted on the site, 2.0.12.
daniel.lewis2
vmWare Virtual Appliance 2.0.12
