Hi,
right now I'm using OpenVPN via IPv4 to route several IPv4 IPs. I now want to switch to do exactly the same but connecting to the VPN via IPv6. I've read the HOWTO (
https://community.openvpn.net/openvpn/wiki/IPv6), but I'm not sure what I need to follow there. I want to access IPv4 adresses via the VPN and IPv6 is just meant to handle the pure VPN traffic - so I guess I do not change much of my config? Just the "local" and "dev" settings maybe? Anything else?
link-mtu 1432
local my-ipv4-prefix.189
port 1194
proto udp
dev tun
ca /usr/local/etc/openvpn/keys/ca.crt
cert /usr/local/etc/openvpn/keys/crt
key /usr/local/etc/openvpn/keys/key
dh /usr/local/etc/openvpn/keys/dh1024.pem
server 10.1.0.0 255.255.255.0
route 10.0.0.0 255.255.255.0
route 10.0.1.0 255.255.255.0
route 10.0.2.0 255.255.255.0
push "route my-ipv4-prefix.186 255.255.255.255"
push "route my-ipv4-prefix.187 255.255.255.255"
push "route my-ipv4-prefix.188 255.255.255.255"
push "route my-ipv4-prefix.190 255.255.255.255"
#push "route my-ipv4-prefix.184 255.255.255.248"
keepalive 10 120
client-to-client
comp-lzo
user nobody
group nobody
persist-key
persist-tun
# tls-auth /usr/local/etc/openvpn/keys/ta.key 0
status openvpn-status.log
verb 4
client-config-dir clients
