Connection OK, but route isn't pushed to client

sunmast

Hi, I've setup a VPN connection successfully with the simplest static key configuration, but I have one problem that I cannot push routes to client.

Server config:

dev tun
proto udp
port 563
ifconfig 10.0.0.129 10.0.0.130
secret static.key

keepalive 10 60
ping-timer-rem
persist-tun
persist-key

#route 10.0.0.0 255.255.255.0 // This is ideal
#route 10.0.0.0 255.255.255.128 // This is also OK
#push route "10.0.0.0 255.255.255.0 10.0.0.129" // Also tried this

Client config:

remote xxxxx
dev tun
port 563
proto udp
ifconfig 10.0.0.130 10.0.0.129
secret static.key

keepalive 10 60
ping-timer-rem
persist-tun
persist-key

The connection seems OK, because the server and client can ping each other. And if I add route to client manually, the client can reach server side network too. But how to make server "push" the route to client?

The client route table is (without manually added entry):
route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 122.192.99.254 0.0.0.0 UG 0 0 0 ppp0
10.0.0.129 * 255.255.255.255 UH 0 0 0 tun0
122.192.99.254 * 255.255.255.255 UH 0 0 0 ppp0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
169.254.0.0 * 255.255.0.0 U 0 0 0 br0
172.16.0.0 * 255.255.255.0 U 0 0 0 br0

Thanks in advance!

BTW, whats the difference of these syntax:

push route "x.x.x.x y.y.y.y"
and
push "route x.x.x.x y.y.y.y"
and
route x.x.x.x y.y.y.y
?

Traffic

sunmast wroteI've setup a VPN connection successfully with the simplest static key configuration, but I have one problem that I cannot push routes to client.

You cannot push anything to the client in static key mode.

sunmast wroteBTW, whats the difference of these syntax:

push route "x.x.x.x y.y.y.y" .. the quotes are in the wrong place
and
push "route x.x.x.x y.y.y.y" .. correct
and
route x.x.x.x y.y.y.y .. correct

sunmast

Traffic wrote
sunmast wroteI've setup a VPN connection successfully with the simplest static key configuration, but I have one problem that I cannot push routes to client.
You cannot push anything to the client in static key mode.

sunmast wroteBTW, whats the difference of these syntax:

push route "x.x.x.x y.y.y.y" .. the quotes are in the wrong place
and
push "route x.x.x.x y.y.y.y" .. correct
and
route x.x.x.x y.y.y.y .. correct

I.c. Thanks.