jarmar I am trying to setup a new OpenVPN server/client which I have done in the past successfully. The only difference is that this time I am using the EasyRSA3 to generate the keys/certs where in the past I used an earlier version of easy-rsa. My config files are the same as used previously but unlike before I am now prompted for a Private Key Password. Looking at the log file it indicates that it is unable to read the password from stdin. What has changed and how do I correct it. My config files are below: [server.ovpn] port 1194 proto udp dev tun ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" tls-auth "C:\\Program Files\\OpenVPN\\config\\ta.key" 0 dh "C:\\Program Files\\OpenVPN\\config\\dh.pem" server 10.8.0.0 255.255.255.0 ifconfig-pool-persist "C:\\Program Files\\OpenVPN\\config\\ipp.txt" push "route 192.168.1.0 255.255.255.0" keepalive 10 120 comp-lzo max-clients 3 persist-key persist-tun status "C:\\Program Files\\OpenVPN\\config\\openvpn-status.log" log-append openvpn.log verb 4 mute 20 [client] client dev tun proto udp remote x.x.x.x resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\john.crt" key "C:\\Program Files\\OpenVPN\\config\\john.key" tls-auth "C:\\Program Files\\OpenVPN\\config\\ta.key" 1 comp-lzo verb 3 mute 20
Traffic When you generate your client cert/key pair .. use the nopass option:$ easyrsa build-client-full clientxx nopass
