Multiple clients to the same server

Pyrithe

Hi,

I try to connect, on the same time, several clients to my openvpn server.
But when I launch a client, its ip address is 10.8.0.6
Next client, same address, so that's a problem.

My configuration :

SERVER

local 192.168.0.4
port 1194
proto udp
dev tun

ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt"
cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\XXXXXX.crt"
key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\XXXXXX.key" # This file should be kept secret
dh "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\dh1024.pem"

topology subnet
server 10.8.0.0 255.255.255.0

keepalive 10 120
comp-lzo
persist-key
persist-tun

status openvpn-status.log
verb 3

CLIENT

client
dev tun
proto udp
remote XX.XXX.XX.XX 1194
route-method exe

resolv-retry infinite
nobind
persist-key
persist-tun

ca "C:\\Program Files\\OpenVPN\\config\\Rodis\\ca.crt"
cert "C:\\Program Files\\OpenVPN\\config\\Rodis\\Sam.crt"
key "C:\\Program Files\\OpenVPN\\config\\Rodis\\Sam.key"
remote-cert-tls server

comp-lzo
verb 3

That I want is :
Connect on the same time all the clients to the same server, to launch RDS applications.

How can I do that?

Thx you!!

Traffic

Can you please post your log files 8-)

Pyrithe

Traffic wroteCan you please post your log files 8-)

No... :?

Because when I tried, this morning... it work!
I connected two clients. One has take @IP 192.168.0.2, and the other 192.168.0.3
Yesterday, all clients have got the same address : 192.168.0.6
No change since this moment... 😃

So, in my configurations servers and clients, do you see any mistake, or something wrong (or something could be better?)

Thx!
(and sorry for my english, i'm french)

Traffic

See --tls-auth in The Manual v23x

Also:

NOTE: your local LAN uses the extremely common subnet address 192.168.0.x or 192.168.1.x. Be aware that this might create routing conflicts if you connect to the VPN server from public locations such as internet cafes that use the same subnet.