Cylindric
We've just bought and started using OpenVPN Access Server (the pre-built VM, v2.0.12) as a two-factor enabled VPN solution for our staff.
I've been having problems with the "OpenVPN Connect" client, in that users are having all sorts of problems with routing. They can usually route web traffic okay, but then our DB stuff fails, and sometimes all network traffic fails until they reboot - as if all the routes get dropped. (Windows 8 clients). I can
I have tried switching to the default OpenVPN client we used to use before, when we used the OpenVPN module for the pfSense firewall, and with that I don't get the 2-factor password prompt.
Our users need access to a remote site too, so the network looks like this:
Internal LAN (10.10.0.0/24)
Remote Site (10.172.0.0/16) permanently connected over IPsec
OpenVPN Dynamic Clients (10.0.7.0/24)
OpenVPN Static Clients (10.0.8.0/24)
Demo/Test (192.168.0.0/24)
I have set the AS to use "Routing" instead of NAT, as we need to know the remote IP of the clients for app auth reasons.
I am specifying private subnets:
10.10.0.0/24
192.168.0.0/24
10.117.0.0/16
But I have now also tried ticking the "should all client traffic be routed through the VPN" to see if it that would help.
Version is 2.0.12.
