Dear friends, unfortunately i got now a DS Lite connection (IPv6) from my ISP. So my old OpenVPN server won't work anymore :-( That mean i have to upgrade it and make a new setup. The first problem was to connect via an IPv4 connection to my DS Lite. I found a service in the Internet which could ensure this (www.feste-ip.net). So now i'm able to connect from an IPv4 (Internet) to my home server, which works proper. I could use for instance port 22 SSH and other services. unfortunately my vpn doesn't work. I know, that openVPN supports IPv6 since version 2.3, so i compile an installation of the lastet version 2.3.6 but i have no glue how to configure it. Has anybody of you made it? Could you give me an example of the configuration that is needed for the server? Here's my old server.conf: [code] # Main Configuration # port 1194 proto udp dev tun server 10.8.0.0 255.255.255.0 # Certificates and Encryption # ca ca.crt cert servername.crt key servername.key crl-verify crl.pem dh dh1024.pem cipher AES-256-CBC comp-lzo # Additional Config # persist-key persist-tun status openvpn-status.log verb 3 tun-mtu 1500 tun-mtu-extra 0 mssfix 1450 route 192.168.0.0 255.255.255.0 push "route 192.168.0.0 255.255.255.0" keepalive 5 30 user nobody group nogroup [/code] I prior used udp protocol, but afaik IPv6 won't work with this, so i have to change to tcp, but i can't get it working... And by the way: i use a raspberry pi (model B) which is running debian 7.1 (raspbian) Second and last question: Is there a way to setup a webinterface for the openvpn server on rpi? Thank you guys & sorry for my bad english, I'm from germany :|

[quote="oggy512"]I prior used udp protocol, but afaik IPv6 won't work with this[/quote]UDP6 will work .. See this: [url]https://community.openvpn.net/openvpn/wiki/IPv6[/url]

OpenVPN with IPv6 / IPv4 support

oggy512

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

Traffic

oggy512 wroteI prior used udp protocol, but afaik IPv6 won't work with this

UDP6 will work ..

See this:
https://community.openvpn.net/openvpn/wiki/IPv6

oggy512

Yepp, i see. the udp problem have nothing to do with openvpn, which i regognize now.
it's due to the feste-ip.net Ipv4 / v6 mapper. This service don't forward udp traffic, it only supports tcp. but that's not the main issue.
I can't get a connect to the vpn server, either on tcp or udp...