Hello, i configured OpenVPN on my Win7 using this guide - https://community.openvpn.net/openvpn/wiki/Easy_Windows_Guide But i'm not sure which IP i have to write in client.ovpn... [code]# The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 192.168.64.101 1194 ;remote my-server-2 1194[/code] Here is details of my network connection: [code]Connection-specific DNS Suffix . : Home IPv4 Address. . . . . . . . . . . : 192.168.64.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.64.1[/code] If i use IP - 192.168.64.101 then i get this error: [code]Fri Jan 30 12:25:59 2015 CreateFile failed on TAP device: \\.\Global\{46611EEB-B853-4714-8517-0A21B7104ACB}.tap Fri Jan 30 12:25:59 2015 MANAGEMENT: Client disconnected Fri Jan 30 12:25:59 2015 All TAP-Windows adapters on this system are currently in use. Fri Jan 30 12:25:59 2015 Exiting due to fatal error[/code] So i'm not sure which IP i have to assign to the client and make port forwarding on my router? I have static IP - wan ip 188.230.***.***

post your configs used, also your 7 is your client or your server? are you trying to connect to yourself?? Michael.

Client [code] client dev tun proto udp remote 192.168.64.105 1194 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\HP-PC.crt" key "C:\\Program Files\\OpenVPN\\config\\HP-PC.key" remote-cert-tls server comp-lzo verb 3 [/code] Server [code] port 1194 proto udp dev tun ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" dh "C:\\Program Files\\OpenVPN\\config\\dh1024.pem" server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 [/code] My server is on WIN7, and yes i was trying to connect to myself on same computer...

if you need to connect to yourself you will need a second TAP adapter. Michael.

Thank you Michael :D In case if someone need it... i created second TAP adapter - START - %PROGRAMFILES%\Tap-Windows - bin (folder) - addtap.bat (run as administrator) and that's it.

I will not open another topic, so i will ask here... It seems that traffic doesn't go through OpenVPN, i'v checked with Wireshark and traffic is not encrypted, then i check tracert - and also does not go through vpn... [code]C:\Users\HP>tracert google.com Tracing route to google.com [89.212.69.102] over a maximum of 30 hops: 1

if you want to access internet via openvpn server you will need to connect from another workstation, also you will need to enable NAT on your openvpn server, user bebop has written a very nice howto with your case. Michael.

Ok, i did that... from "Routing all client traffic (including web-traffic) through the VPN" - (howto) Here is my server.ovpn [code]# If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" push "redirect-gateway def1"[/code] [code]# Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" push "dhcp-option DNS 10.8.0.1"[/code] This two lines are added: [b]push "redirect-gateway def1"[/b] [b]push "dhcp-option DNS 10.8.0.1"[/b] but now i can not browse on internet, my internet connection is down?

[quote="nedamime"]push "dhcp-option DNS [u]10.8.0.1[/u]"[/quote]is this server a DNS server or proxy ? Try using google DNS 8.8.8.8 & 8.8.4.4

Result of ipconfig /all: [code] Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TAP-Windows Adapter V9 Physical Address. . . . . . . . . : 00-FF-46-61-1E-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.8.0.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.252 Lease Obtained. . . . . . . . . . : Friday, January 30, 2015 6:05:19 PM Lease Expires . . . . . . . . . . : Saturday, January 30, 2016 6:05:19 PM Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 10.8.0.2 DHCPv6 IAID . . . . . . . . . . . : 369164102[/code] [code]Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.64.105(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.64.1 DHCPv6 IAID . . . . . . . . . . . : 243319150 DNS Servers . . . . . . . . . . . : 192.168.64.1 NetBIOS over Tcpip. . . . . . . . : Disabled[/code] I'm trying to use DNS server not proxy.

do you run DNS service on your openvpn server? Michael

Can't connect with client - IP address?

nedamime

i did everything, but no luck...

it's a weird when i run tracert 8.8.8.8

C:\Users\HP>tracert 8.8.8.8

Tracing route to google-public-dns-a.google.com [8.8.8.8]
over a maximum of 30 hops:

  1    <1 ms     1 ms     1 ms  HP-PC.mshome.net [10.8.0.1]
  2     1 ms     1 ms     1 ms  HP-PC.mshome.net [10.8.0.1]
  3     2 ms     2 ms     3 ms  HP-PC.mshome.net [10.8.0.1]
  4     3 ms     4 ms     3 ms  HP-PC.mshome.net [10.8.0.1]
...

Why is that?

RRAS - enabled / started / automatic - disable firewall ... but nothing...

« Previous Page