Hello,
I'm new to openVPN, i've recently configured an openVPN server on my synology NAS with the intention of routing all my traffic through it when I have to connect to unknown wifi locations. I was wondering if someone could look over my config file and the log file from my most recent connection attempt and let me know if there are any issues. I don't see any error messages so I feel like everything is working properly, however when i'm connected and i run a tracert to google.ca I don't see my vpn server IP address in the list.
Config file:
dev tun
tls-client
remote jibs.RestofHostNameGoesHere.org 1194
# The "float" tells OpenVPN to accept authenticated packets from any address,
# not only the address which was specified in the --remote option.
# This is useful when you are connecting to a peer which holds a dynamic address
# such as a dial-in user or DHCP client.
# (Please refer to the manual of OpenVPN for more information.)
#float
# If redirect-gateway is enabled, the client will redirect it's
# default network gateway through the VPN.
# It means the VPN connection will firstly connect to the VPN Server
# and then to the internet.
# (Please refer to the manual of OpenVPN for more information.)
#redirect-gateway
# dhcp-option DNS: To set primary domain name server address.
# Repeat this option to set secondary DNS server addresses.
#dhcp-option DNS DNS_IP_ADDRESS
pull
# If you want to connect by Server's IPv6 address, you should use
# "proto udp6" in UDP mode or "proto tcp6-client" in TCP mode
proto udp
script-security 2
ca ca.crt
comp-lzo
reneg-sec 0
auth-user-pass
Connection log:
Fri Dec 05 09:49:09 2014 OpenVPN 2.3.5 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Oct 28 2014
Fri Dec 05 09:49:09 2014 library versions: OpenSSL 1.0.1j 15 Oct 2014, LZO 2.05
Fri Dec 05 09:49:16 2014 WARNING: No server certificate verification method has been enabled. See
http://openvpn.net/howto.html#mitm for more info.
Fri Dec 05 09:49:16 2014 UDPv4 link local (bound): [undef]
Fri Dec 05 09:49:16 2014 UDPv4 link remote: [AF_INET]MyExternalIpAddressIsCorrect:1194
Fri Dec 05 09:49:16 2014 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Fri Dec 05 09:49:16 2014 [jibs.RestofHostNameGoesHere.org] Peer Connection Initiated with [AF_INET]MyExternalIpAddressIsCorrect:1194
Fri Dec 05 09:49:19 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Fri Dec 05 09:49:19 2014 open_tun, tt->ipv6=0
Fri Dec 05 09:49:19 2014 TAP-WIN32 device [Local Area Connection 2] opened: \\.\Global\{A1CB4005-AD45-4792-880A-793E156FE36B}.tap
Fri Dec 05 09:49:19 2014 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.1.0.10/255.255.255.252 on interface {A1CB4005-AD45-4792-880A-793E156FE36B} [DHCP-serv: 10.1.0.9, lease-time: 31536000]
Fri Dec 05 09:49:19 2014 Successful ARP Flush on interface [29] {A1CB4005-AD45-4792-880A-793E156FE36B}
Fri Dec 05 09:49:24 2014 Initialization Sequence Completed
I've removed my NAS hostname and external IP address from config and log file I posted above, I have verified that both of them are correct. I would like to ensure that all my traffic routed through my VPN server.
Thank you in advance for the help
