No, it was not forwared. I forwared it now, but I still cant access my lan... echo 1 > /proc/sys/net/ipv4/ip_forward is the correct way to forward it, right? I'm adding my code and log. Can you find the problem reading them?
Server
push "route 192.168.1.0 255.255.255.0"
push "route 10.8.0.0 255.255.255.0"
dev tun
management 127.0.0.1 1195
server 10.8.0.0 255.255.255.0
dh /var/packages/VPNCenter/target/etc/openvpn/keys/dh1024.pem
ca /var/packages/VPNCenter/target/etc/openvpn/keys/ca.crt
cert /var/packages/VPNCenter/target/etc/openvpn/keys/server.crt
key /var/packages/VPNCenter/target/etc/openvpn/keys/server.key
max-clients 5
comp-lzo
persist-tun
persist-key
verb 3
#log-append /var/log/openvpn.log
keepalive 10 60
reneg-sec 0
plugin /var/packages/VPNCenter/target/lib/radiusplugin.so /var/packages/VPNCenter/target/etc/openvpn/radiusplugin.cnf
client-cert-not-required
username-as-common-name
duplicate-cn
status /tmp/ovpn_status_2_result 30
status-version 2
proto udp6
port 1194
echo 1 > /proc/sys/net/ipv4/ip_forward
Client
dev tun
tls-client
remote xx.xxx.xxx.xxx 1194
# The "float" tells OpenVPN to accept authenticated packets from any address,
# not only the address which was specified in the --remote option.
# This is useful when you are connecting to a peer which holds a dynamic address
# such as a dial-in user or DHCP client.
# (Please refer to the manual of OpenVPN for more information.)
#float
# If redirect-gateway is enabled, the client will redirect it's
# default network gateway through the VPN.
# It means the VPN connection will firstly connect to the VPN Server
# and then to the internet.
# (Please refer to the manual of OpenVPN for more information.)
#redirect-gateway
# dhcp-option DNS: To set primary domain name server address.
# Repeat this option to set secondary DNS server addresses.
dhcp-option DNS xx.xxx.xxx.xxx
dhcp-option DNS xx.xxx.xxx.xxx
pull
# If you want to connect by Server's IPv6 address, you should use
# "proto udp6" in UDP mode or "proto tcp6-client" in TCP mode
proto udp
script-security 2
ca ca.crt
comp-lzo
reneg-sec 0
auth-user-pass
auth-nocache
Log
Tue Dec 16 11:58:01 2014 OpenVPN 2.3.6 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Dec 1 2014
Tue Dec 16 11:58:01 2014 library versions: OpenSSL 1.0.1j 15 Oct 2014, LZO 2.08
Tue Dec 16 11:58:04 2014 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Tue Dec 16 11:58:04 2014 UDPv4 link local (bound): [undef]
Tue Dec 16 11:58:04 2014 UDPv4 link remote: [AF_INET]xx.xxx.xxx.xxx:1194
Tue Dec 16 11:58:05 2014 [synology.com] Peer Connection Initiated with [AF_INET]xx.xxx.xxx.xxx:1194
Tue Dec 16 11:58:23 2014 SIGHUP[hard,] received, process restarting
Tue Dec 16 11:58:23 2014 OpenVPN 2.3.6 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Dec 1 2014
Tue Dec 16 11:58:23 2014 library versions: OpenSSL 1.0.1j 15 Oct 2014, LZO 2.08
Tue Dec 16 11:58:29 2014 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Tue Dec 16 11:58:29 2014 UDPv4 link local (bound): [undef]
Tue Dec 16 11:58:29 2014 UDPv4 link remote: [AF_INET]xx.xxx.xxx.xxx:1194
Tue Dec 16 11:58:30 2014 [synology.com] Peer Connection Initiated with [AF_INET]xx.xxx.xxx.xxx:1194
Tue Dec 16 11:58:32 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Tue Dec 16 11:58:32 2014 open_tun, tt->ipv6=0
Tue Dec 16 11:58:32 2014 TAP-WIN32 device [Open VPN] opened: \\.\Global\{FB40CE2D-3ACF-47FA-838C-9313A27109D5}.tap
Tue Dec 16 11:58:32 2014 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {FB40CE2D-3ACF-47FA-838C-9313A27109D5} [DHCP-serv: 10.8.0.5, lease-time: 31536000]
Tue Dec 16 11:58:32 2014 Successful ARP Flush on interface [20] {FB40CE2D-3ACF-47FA-838C-9313A27109D5}
Tue Dec 16 11:58:37 2014 Initialization Sequence Completed
