Ty for the reply...
I think I have sorted where they keys go...
(I found the info here:
https://community.openvpn.net/openvpn/wiki/Easy_Windows_Guide#CopyingtheServerandClientFilestoTheirAppropriateDirectories (Just in case it helps someone else))
I have managed to get a connection to the server from my client now...
I can "see" the apache webserver on the linux server...
However I cannot "see" the rest of the world... Firewall Issue/Misconfig of Iptables?
I followed the following instructions...
----------------------------------------------------------------------------------------------------------
15. Enable forwarding and set-up iptables
enable network forwarding by uncommenting/adding net.ipv4.ip_forward = 1 to sysctl.conf
vim /etc/sysctl.conf
:%s/net.ipv4.ip_forward = 0/net.ipv4.ip_forward = 1/
sysctl -p
set-up the following iptables rules
iptables -A INPUT -p udp -m state --state NEW -m udp --dport 1194 -j ACCEPT
iptables -A FORWARD -s 192.168.88.0/24 -j ACCEPT
iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -t nat -A POSTROUTING -s 192.168.88.0/24 -o eth0 -j MASQUERADE
# in openvz/vservers you may need the following instead
# iptables -t nat -A POSTROUTING -s 192.168.88.0/24 -j SNAT --to-source <PUBLIC_VPN_IP>
iptables-save > /etc/iptables.rules
for persistent firewall rules you may want to use the iptables-persistent package or just set-up a simple script in /etc/network/if-pre-up.d/ which will load the rules in /etc/iptables.rules using iptables-restore
for example:
cat /etc/network/if-pre-up.d/iptables
#!/bin/bash
test -e /etc/iptables.rules && iptables-restore -c /etc/iptables.rules
-------------------------------------------------------------------------------------------------------------
I am running a VZ Debian system...
I tried both alternatives...
