My server and client are two Vm's running on my laptop. I was able to configure the server side and Openvpn starts sucessfully, but I cannot see tun0 interface on the client side. Here are my client and server configurations
Server etho: 192.168.154.132
Client eth0: 192.168.154.133
[root@server openvpn]# cat server.conf
port 1194
proto udp
dev tun
ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt
cert /etc/openvpn/easy-rsa/2.0/keys/server.crt
key /etc/openvpn/easy-rsa/2.0/keys/server.key # This file should be kept secret
dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "redirect-gateway def1 local"
push "dhcp-option DNS 8.8.8.8 "
push "dhcp-option DNS 8.8.4.4 "
client-to-client
keepalive 10 120
comp-lzo
max-clients 100
user nobody
group nobody
persist-key
persist-tun
status /var/log/openvpn-status.log
log-append openvpn.log
verb 3
-------------------------------------------------------------------------------------------
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
"client.conf" 123L, 3468C
