Confused
Hi,
I'm currently trying to connect a VPN from a laptop to a network attached to a3G enabled router (Teltonika RUT500) the router already has OpenVPN preinstalled on it and can be set as either a client or server (ours is set to server), it has a fixed ip sim installed which is pingable over the internet, the laptop we are using is running Open VPN GUI (2.3.2 I think) as the newest version wouldn't work on this machine (windows7 64) I have followed the static key instructions as closely as I can but the Teltonika uses a wizard as opposed to config files,although I have managed to share the key ok. My problem is I cant get the VPN to connect! I will post the settings used and log below, although I will hash out the ip of the sim!
Log file:
Tue Nov 04 16:15:02 2014 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Aug 7 2014
Enter Management Password:
Tue Nov 04 16:15:03 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Tue Nov 04 16:15:03 2014 open_tun, tt->ipv6=0
Tue Nov 04 16:15:03 2014 TAP-WIN32 device [Local Area Connection 2] opened: \\.\Global\{81179416-2852-42A0-8ABA-E64B859770E7}.tap
Tue Nov 04 16:15:03 2014 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {81179416-2852-42A0-8ABA-E64B859770E7} [DHCP-serv: 10.8.0.5, lease-time: 31536000]
Tue Nov 04 16:15:03 2014 UDPv4 link local (bound): [undef]
Tue Nov 04 16:15:03 2014 UDPv4 link remote: [AF_INET]###.###.##.###:####
Tue Nov 04 16:23:03 2014 SIGTERM[hard,] received, process exiting
Client Config file:
remote ###.###.##.###
dev tun
ifconfig 10.8.0.6 10.8.0.5
secret static.key
Server Configuration on RUT500 preinstalled program
Open VPN: enabled
Tun/Tap: Tun
Protocol: UDP
Port: #### (I've hashed this out also for security but its the same port that is mentioned in the log, and I've cleared it on both firewalls)
LZO: not enabled
Authentication: Static Key
Local tunnel endpoint IP: 10.8.0.5
Remote tunnel endpoint IP: 10.8.0.6
Resolve Retry: infinite
Remote network ip address:
Remote network netmask:
Static pre-shared key: Uploaded file (the key from the client machine)
thanks for your help!
Confused
I have tried 10.8.0.1 and 10.8.0.2 but this makes little difference, and unfortunately I have no server log as the Teltonika doesn't have this feature, or if it does it's not obvious!
Confused
I am testing my connection across the internet from a standard broadband connection to the 3G sim, I've looked thorough the 3G routers' settings pages and can fond no reference to a server log so presumably it doesn't keep one.
