andreiwebnet Hello, Im trying to setup my openvpn server (centos) to asign specific ip-s to clients and i get an error: "There is a problem in your selection of --ifconfign endpoints [local=192.168.10.114, remote=192.168.10.1] the local and remote VPN endpoints must exist within same subnet. This is a limitation of -def tun when used with the tap-win32 driver. Try openvpn --show-valid-subnets' option for more info" My server conf: port 1194 proto udp dev tun ca ca.crt cert server.crt key server.key # This file should be kept secret dh dh2048.pem server 192.168.10.0 255.255.255.0 push "route 192.168.1.0 255.255.255.0" ifconfig-pool-persist /etc/openvpn/ipp.txt keepalive 10 120 comp-lzo user nobody group openvpn persist-key persist-tun status /var/log/openvpn-status.log verb 3 client-config-dir /etc/openvpn/staticclients Client config: client dev tun proto udp remote MyIspIp 1194 resolv-retry infinite nobind user nobody group openvpn persist-key persist-tun ca ca.crt cert andrei.crt key andrei.key ns-cert-type server comp-lzo verb 3 in /etc/openvpn/staticlients i have a file configured for each cert that i created. For example my file contains: ifconfig-push 192.168.10.114 192.168.10.1 I have tried to put various combinations that i have found on internet without any success. I would apreaciate some help Ty
debbie10t andreiwebnet wroteFor example my file contains:ifconfig-push 192.168.10.114 192.168.10.1Your IP addresses are not in the same net30 subnet ... Please read about --topology in the manual.
