Good day; Recently I did setup OpenVPN on my Linksys router with Tomato running on it.
After some minor self inflicted hick up's I got it running just fine. Having said this, it is running fine in routing (TUN) however, when setting the config to "bridged" (TAP) it doesn't seem to be working.
What is happening (TAP) is the following; The client is connecting just fine and the GUI shows that I'm connected. It will show the IP address (in my case 192.168.2.50) however, I can't connect to anything. After 30 seconds or so, it seems to reconnect.. but this still doesn't make it work.
If I disconnect, the GUI locks up. The only way to make it work again is to reboot my computer...
Tue Sep 23 20:57:39 2014 us=247209 NOTE: Options consistency check may be skewed by version differences
Tue Sep 23 20:57:39 2014 us=248209 WARNING: 'version' is used inconsistently, local='version V4', remote='version V0 UNDEF'
Tue Sep 23 20:57:39 2014 us=248209 WARNING: 'dev-type' is present in local config but missing in remote config, local='dev-type tap'
Tue Sep 23 20:57:39 2014 us=248209 WARNING: 'link-mtu' is present in local config but missing in remote config, local='link-mtu 1590'
Tue Sep 23 20:57:39 2014 us=248209 WARNING: 'tun-mtu' is present in local config but missing in remote config, local='tun-mtu 1532'
Tue Sep 23 20:57:39 2014 us=248209 WARNING: 'comp-lzo' is present in local config but missing in remote config, local='comp-lzo'
Tue Sep 23 20:57:39 2014 us=248209 WARNING: 'cipher' is present in local config but missing in remote config, local='cipher AES-128-CBC'
Tue Sep 23 20:57:39 2014 us=248209 WARNING: 'auth' is present in local config but missing in remote config, local='auth SHA1'
Tue Sep 23 20:57:39 2014 us=248209 WARNING: 'keysize' is present in local config but missing in remote config, local='keysize 128'
Tue Sep 23 20:57:39 2014 us=249209 WARNING: 'key-method' is present in local config but missing in remote config, local='key-method 2'
Tue Sep 23 20:57:39 2014 us=249209 WARNING: 'tls-server' is present in local config but missing in remote config, local='tls-server'
Tue Sep 23 20:57:39 2014 us=249209 Data Channel Encrypt: Cipher 'AES-128-CBC' initialized with 128 bit key
Tue Sep 23 20:57:39 2014 us=249209 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Tue Sep 23 20:57:39 2014 us=249209 Data Channel Decrypt: Cipher 'AES-128-CBC' initialized with 128 bit key
Tue Sep 23 20:57:39 2014 us=249209 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Tue Sep 23 20:57:39 2014 us=249209 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Tue Sep 23 20:57:39 2014 us=249209 [server] Peer Connection Initiated with [AF_INET]142.68.26.53:1194
Tue Sep 23 20:57:40 2014 us=440277 MANAGEMENT: >STATE:1411516660,GET_CONFIG,,,
Tue Sep 23 20:57:41 2014 us=630345 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
Tue Sep 23 20:57:41 2014 us=747352 PUSH: Received control message: 'PUSH_REPLY,dhcp-option DNS 192.168.2.1,route-gateway 192.168.2.1,ping 15,ping-restart 60,ifconfig 192.168.2.50 255.255.255.0'
Tue Sep 23 20:57:41 2014 us=747352 OPTIONS IMPORT: timers and/or timeouts modified
Tue Sep 23 20:57:41 2014 us=747352 OPTIONS IMPORT: --ifconfig/up options modified
Tue Sep 23 20:57:41 2014 us=747352 OPTIONS IMPORT: route-related options modified
Tue Sep 23 20:57:41 2014 us=747352 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Tue Sep 23 20:57:41 2014 us=747352 Preserving previous TUN/TAP instance: Local Area Connection 3
Tue Sep 23 20:57:41 2014 us=747352 Initialization Sequence Completed
Tue Sep 23 20:57:41 2014 us=747352 MANAGEMENT: >STATE:1411516661,CONNECTED,SUCCESS,192.168.2.50,142.68.26.53
Tue Sep 23 20:58:25 2014 us=228839 TCP/UDP: Closing socket
Tue Sep 23 20:58:25 2014 us=228839 Closing TUN/TAP interface
I'm running W7 x64,
Open VPN 2.3.2
the TAP Driver is V9.00.21
I tried it on an other W7 machine but the same issue
Thanks for the help!
henk
