Zeawiel
Hello, I'm having a tricky issue since some days :
I'm using a VM in which I run openvpn.
The VM's host and the VM are both runing under CentOS 6.5
I'm not really sure that problem came from OpenVPN but maybe: I can't access to the LAN from the client.
Here is my config
Client (W7)_TAP <=~=~=~=> VPN_TAP <=== Bridge ===> eth2 <===> vnet <=== Bridge_Host ===> eth1.2 <===> LAN_VLAN2
............................. |<------------------VPN VM --------------->|<---------------- HOST -------------------->|
When I try to ping addresses of LAN the ARP request are send by the client. With tcpdump I see those request in the vnet interface of the HOST. But they are not forwarded to the bridge in eth1.2
If I try to ping from the VM_Bridge, the ping is successfull.
In both linux, the ip_forwad variable is set to 1
VPN_TAP, eth2, vnet and eth1.2 are set to promisc up
The VLAN2 have a range : 10.0.8.128/27
The server-bridge configuration is : server-bridge 10.0.8.153 255.255.255.224 10.0.8.154 10.0.8.158
"brctl show" on both are returning that the interfaces are in them.
All the interfaces are UP.
This is really weird. Do you have any hints ?
Regards,
Zeawiel
